NOTE: The threads inside the Cylinder (13) are plastic. Do not exert too much twisting pressure or they can be damaged. The Cylinder should easily twist into the Housing (1) until snug. See Figures 2 & 3
3.The Air Hammer is now ready to use as a chisel.
4.To remove, or change chisel heads, simply reverse steps 1 and 2.
USE AS A SCALER
Figure 4
8A | 7A | 6A | 5A | 4A |
3A | 2A | 1A | 8A |
SKU 95801 | For technical questions, please call | Page |
