Harbor Freight Tools 96141 manual Operation, Charging with the Cranking Handle

Models: 96141

1 6
Download 6 pages 30.31 Kb
Page 4
Image 4
Operation

Operation

1.The Spotlight can be charged in three different ways by cranking the Handle, using the 120 V~ Adapter, or using the Cigarette Plug Adapter.

2.The Green LED will indicate when the battery is fully charged. A red LED will indi- cate that the battery is charging.

Charging with the Cranking Handle

Figure 1

Handle

Charge

Indicator LED’s

1.Pull out the Handle as shown in Figure 1.

2.Grasp the Handle and crank it continuously clockwise. The red LED will stay on while the Spotlight is charging. For every 3 minutes of turning the handle you will get one minute of light. The Green LED will come on when the Spotlight is fully charged.

3.When finished, fold the Handle back into its slot when done cranking.

Using the Cigarette Plug Adapter

1.Insert the plug end into the charge receptacle on the Spotlight.

2.Plug the Cigarette Plug Adapter into the vehicle’s cigarette lighter socket.

3.Allow the Spotlight to charge until the green LED comes on.

4.To prevent the vehicle’s battery from running down, charge the spotlight only when the vehicle’s engine is running.

5.The Green LED will come on when the Spotlight is fully charged.

SKU 96141

For technical questions, please call 1-800-444-3353.

Page

Page 4
Image 4
Harbor Freight Tools 96141 manual Operation, Charging with the Cranking Handle, Using the Cigarette Plug Adapter