Harbor Freight Tools 97385 Specifications, Unpacking, Initial Set Up Instructions, Assembly

Models: 97385

1 8
Download 8 pages 27.11 Kb
Page 4
Image 4

approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)

6.The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Save these instructions.

Specifications

Product Applications

May be used with most router

and drill press tables.

 

Construction/Material

Aluminum Stop

Steel Housing

Hose Adapter Size

2-1/2” Diameter

 

 

Overall Dimensions

25-1/4” L x 4-1/8” W x 4-1/8” H

 

 

Collapsed

36-3/4” L x 4-1/8” W x 4-1/8” H

Dimensions

 

Extended Fence

23-13/16” L x 2-1/8” W x 1-7/8”

Dimensions

H

 

T-Slots to Accept Featherboards

 

or Stops / Independently

Additional Features

Adjustable Fence Halves /

 

Fence Extension & Material

 

Stop

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as

possible.

Initial Set Up

Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

WARNING To prevent serious injury

from accidental operation:

Turn the Power Switch of the router or drill press to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the Router Table Fence.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Assembly

To Install The Vacuum Attachment:

1.Slide the head of two Carriage Screws (13) into the center channel of the Fence Slide (5) Repeat the same procedure for the other Fence Slide, but insert a Carriage Screw (14) as well. Guide the four shorter Screws into the center and adjacent two holes in the Fence (1)

(See Assy. Diagram.)

SKU 97385

For technical questions, please call 1-800-444-3353.

Page 4

Page 4
Image 4
Harbor Freight Tools 97385 operating instructions Specifications, Unpacking, Initial Set Up Instructions, Assembly