the “C” Clamp (9). Slide the End Slide (6) to the right or left along the Fence Slides (5) to the point at which you need to stop your material. Then retighten the Knob (11) to secure the End Slide (6) in place.
(See Assy. Diagram.)
4.NOTE: The End Slide (6) may be in- serted in either the left or right side of the Fence Slides (5) depending upon the application.
(See Assy. Diagram.)
Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
WARNING To prevent serious injury
from accidental operation:
Turn the Power Switch of the router or drill press to its “OFF” position and unplug the machine from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from EQUIPMENT failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Inspection, Maintenance And Cleaning
1.BEFORE EACH USE, inspect the general condition of the Router Table Fence. Check for loose screws, mis- alignment or binding of moving parts, cracked or broken parts, damaged and any other condition that may af- fect its safe operation.
2.After Use, clean external surfaces of the Router Table Fence with a clean, moist cloth and mild detergent. Then dry. Do not use solvents.
3.WHEN STORING, keep the Router Table Fence in a clean, dry, safe loca- tion out of reach of children and other unauthorized people.
PLEASE READ THE
FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he
or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 97385 | For technical questions, please call | Page 6 |
