FUNCTIONAL DESCRIPTION
Specifications
Cup Capacity | 1 Quart | |
Operating Air Pressure | 60 PSI | |
Maximum Air Pressure | 115 PSI | |
Air Consumption | 10 SCFM @ 60 PSI | |
Air Inlet | 1/4" | |
Nozzle Size | 0.07" | |
Needle Size | 1/8" dia. | |
Draw Type | Siphon Feed | |
Spray Pattern | Horizontal, vertical, | |
round, diagonal | ||
|
Components and Controls
INITIAL TOOL SET UP/
ASSEMBLY
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Unpacking
When unpacking, check to make sure
Pattern Control Knob (10)
Fluid Control
Knob (16)
Trigger (7)
Cup
Locking
Lever (32)
Air Inlet (20)
Cup Mounting
Yoke (33)
Cup (31)
Air Cap (1)
that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown throughout the manual as soon as possible.
•This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.
Air Supply
TO PREVENT
EXPLOSION:
Use only clean, dry, regulated, compressed air to power this tool. Do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
Fig. 1
SKU 97855 | For technical questions, please call | Page 7 |
