Harbor Freight Tools 98089 operating instructions Muffler 9B Reduces both noise and emissions

9.Throttle Trigger (10D): Controls the Engine speed. Pulling back on the Throttle Trigger opens the throttle and the Engine accelerates. Releasing the Throttle Trig- ger slows down the Engine.

10.Rear Handle (7D): Use to securely hold the Cut Off Saw when operating.

11.Filter Cover Lock Lever (13E): Locks the Air Filter Cover (1E). Pull back on the Filter Cover Lock Lever to open the Air Filter Cover.

12.Pre-Filter 1 (2E), Pre-Filter 2 (3E), Filter Housing (4E), Paper Air Filter (5E), Secondary Filter (6E): Filters the air, preventing dirt and debris from entering the Carburetor (7C).

13.Choke Lever (5C): Turning this Lever counterclockwise closes the Carburetor. Use the Choke Lever to prime the Engine (cold starting). Turn clockwise for nor- mal operation.

14.Starter Grip (3A): Pull to start Engine.

15.Fuel Tank Cap (16C): Open this Cap for filling the Fuel Tank (2C, 10C). Close the

Fuel Tank Cap prior to for starting and operation.

16.Decompression Valve (7B): Press down on this Valve to make starting easier. When air pressure in the Engine reaches a preset value, the Valve automatically closes.

17.Belt Tensioner with Tensioning Nut (35F): For V-Belt tension adjustment. Turn the Nut clockwise to loosen the V-Belt. Turn the Nut counterclockwise to add more tension to the V-Belt.

18.Muffler (9B): Reduces both noise and emissions.

19.Blade Guard Positioning Knob (38F): Loosen the Knob to adjust the Blade Guard (19F) position.

20.Shaft Lock (34F): Press and hold the Shaft Lock to facilitate Saw Blade (23F) changing and installation.

21.Trigger Safety Lever (16D): This lever must be depressed in order for the engine to start.

22.Foot Plate (26C): Place foot on plate while starting engine.

SKU 98089 For technical questions, please call 1-800-444-3353 PAGE 9