force. Keep your fingers clear when
releasing.
5.If you are unable to clear the nail jam using the method prescribed above, the tool should be taken to a qualified service technician for proper servicing.
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use.
TO PREVENT EXPLOSION: Lubricate the tool only with specified lubricants. Lubricate the air inlet using only pneumatic tool oil. Lubricate the internal mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion.
WARNING! Anytime any maintenance or repairs are done, wear
appropriate hearing protection. THEN:
a. Disconnect the Nailer from its air supply.
b. Empty the Magazine (79) com- pletely.
c.Try to fire the Nailer into a piece of scrap wood to ensure that there is no trapped air in the system.
d.Always leave Magazine open dur- ing maintenance. The Magazine is
6.Dirt in the air supply is a major cause of pneumatic tool wear. Use a filter in the compressed air system for better performance and longer tool life.
7.Make sure Trigger (59) and Safety Nosepiece (42) move freely, with- out sticking. Do not use nailer if Trigger or Safety Nosepiece sticks.
8.Wipe down exterior of the Nailer with a clean cloth before storing.
9. Store in a clean, dry and safe location out of reach of children.
