4.Slide Cutting Blade (9) onto Feed Screw, making sure the edges of Cut- ting Blade face front of housing.
5.WARNING! Cutting Blade has sharp blades. Wear gloves and use care when installing Cutting Blade.
6.Slide selected Cutting Plate (6, 7, or 8) over Cutting Blade, using the slot along Plate edge as guide.
7.Screw Cap (1) into place on hous- ing until secure. CAUTION! Do not overtighten.
8.Slide Hopper Plate (13) onto top of Head until secure.
9.Set Grinder on flat and stable counter space that does not block vents along bottom of housing.
10.Cut foods into small pieces that can easily fit into Hopper.
Operation
(For 99598 Meat Grinder)
Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
1.Once food is ready, plug in Power Cord (17) and press Switch (20) to activate.
2.Feed food into Hopper Plate. Use Food Pusher (14) to press food down Plate and into Head.
3.WARNING! Do NOT use fingers to push food into Grinder. Only use Food Pusher.
4.To make sausage, insert desired Sausage Maker (3, 4, or 5) into Sau- sage Adapter (2).
5.Place wide end of Sausage Adapter against the Head and in front of Cut- ting Blade.
6.Slide Cap over Sausage Maker and Adapter and turn clockwise until Sau- sage Adapter is fastened securely against housing. CAUTION! Do not overtighten.
7.For making Kubbe, place Kubbe At- tachments (10, 11) onto Feed Screw shaft. Slide down until the Attach- ment tabs fit into the slots.
8.Slide Cap over Attachments and turn clockwise until fastened securely against housing. CAUTION! Do not overtighten.
Assembly
(For 99599 Meat Grinder)
Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation or electric shock:
Before appliance assembly or adjustment, make sure the appliance’s switch is turned off, the cord is unplugged, and the unit has cooled completely.
SKU 99598/99599 For technical questions, please call | Page 7 |
