9.If the Grinder gets jammed, the over- load light will flash and the
10.When jammed, the Circuit Breaker
(26)will trigger. Once jam is cleared (Inspection And Maintenance), reset Circuit Breaker switch.
11.To make sausage, insert desired Sausage Maker (3, 4, or 5) into Sau- sage Adapter (2).
12.Place wide end of Sausage Adapter against the Head and in front of Cut- ting Blade.
13.Slide Cap over Sausage Maker and Adapter and turn clockwise until Sau- sage Adapter is fastened securely against housing. CAUTION! Do not overtighten.
14.For making Kubbe, place Kubbe At- tachments (9, 10) onto Feed Screw shaft. Slide down until the Attach- ment tabs fit into the slots.
15.Slide Cap over Attachments and turn clockwise until fastened securely against housing. CAUTION! Do not overtighten.
INSPECTION and
MAINTENANCE
To prevent serious injury
from accidental operation or electric shock:
Before appliance inspection or maintenance, make sure the appliance’s switch is turned off, the cord is unplugged, and the unit has cooled completely.
To prevent serious injury from Appliance failure:
Do not use damaged appliances. If abnormal noise or vibration occurs, have the problem corrected before further use.
1.BEFORE EACH USE, inspect the general condition of the appliance. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir- ing, and any other condition that may affect its safe operation.
2.To clear jams, switch off Grinder and remove power cord from outlet.
3.Unscrew Cap and remove Cutting Plate. CAUTION! Use screwdriver (not included) to remove Cutting Plate from Head. Do not remove with fingers.
4.Remove clogged meat, wash parts in warm, soapy water, dry and reas- semble.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or
she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 99598/99599 For technical questions, please call | Page 9 |
