Harbor Freight Tools Model 93819 manual Symbology, Unpacking, Assembly And Operating Instructions

SYMBOLOGY

FIGURE D

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

ASSEMBLY AND OPERATING INSTRUCTIONS

NOTE:

For additional information regarding the parts listed in the

following pages, refer to the Assembly Diagram on page 13.

1. WARNING! Always make sure to turn off the electricity powering the Pump’s electrical outlet and that the Pump is unplugged from its outlet prior to assembling the unit, unclogging the unit, or making any adjustments to the unit.

2.If necessary, have a certified electrician install (within 14 feet of where the Pump will be located) a 120 volt, GFCI electrical outlet that is dedicated only to the Pump. Any outlet should be well above the water line.

3.The size of the discharge outlet on the Union (37) is 1-1/2” diameter. Only a

1-1/2” diameter Discharge Pipe (not included) must be used. Do not attempt to reduce the discharge size below 1-1/2” as this will affect Pump flow and perfor- mance. (See Figure E, next page.)

SKU 93819 For technical questions, please call 1-800-444-3353 PAGE 8 93820