3.Use the right product for the job. There are certain applications for which this product was designed. Do not use small tools, attachments, or equipment to do the work of larger industrial tools, attachments, or equipment.
4.Maintain a safe environment. Keep the area well lit. Make sure there is ad- equate surrounding space. Always keep the area free of obstructions, grease, oil, trash, and other debris. Do not use an electrically powered product in areas near flammable chemicals, dusts, and vapors.
5.WARNING! Risk of electrical shock. Always disconnect the Pump from its power source before handling or making any adjustments to the tool. Always wear
6.Do not pump hazardous materials. Do not pump explosive or flammable materials such as fuel, oil, kerosene, gasoline, etc. Do not pump in close proxim- ity to flammable or explosive materials. Do not pump fats, oils, salt or waste water. This Pump is designed to move clean or dirty water only. Do not pump water over 95 degrees Fahrenheit.
7.Make sure the discharge pipe (not included) is secured to a solid surface to ensure the stability of the Pump.
8.Make sure to position the Pump on a flat, level, solid surface.
9.
WARNING! Always arrange a “drip loop” in the Power Cord connecting the Pump to a 120 volt, GFCI electrical outlet. A drip loop is that part of the Power Cord below the level of the outlet to prevent water from traveling along the Power Cord and coming in contact with the outlet. If the Power Plug or electrical outlet does get wet, do not unplug the Power Cord. Disconnect the fuse or circuit breaker that supplies power to the Pump. Then, unplug the Power Cord and examine for presence of water in the outlet. (See Figure A.)
PUMP
OUTLET
PUMP
OUTLET
FIGURE A
WATER DRIPS OFF CORD, AWAY FROM OUTLET.
