Harman FL 8380 owner manual Rear Panel Connections, ¡ £¢ ∞, AC Power Cord, Coaxial Digital Output

Rear Panel Connections

¡ ™ £¢ ∞

			LEFT
	OUT	IN
			RIGHT
DIGITAL			AUDIO
OUTPUT	REMOTE		OUTPUT

AC INPUT

AC 230V ~ 50Hz

20W

®

HDCD® and High Definition Compatible Digital®

are registered trademarks of Pacific Microsonics, Inc.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SHOCK HAZARD: DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

SERIAL NO.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

MODEL NO.: FL 8380

HARMAN KARDON

CLASS 1 LASER PRODUCTNORTHRIDGE CALIFORNIA, U.S.A.

MADE IN CHINA

AC Power Cord	Remote Control Input
Coaxial Digital Output	Analog Audio Outputs
Remote Control Output

AC Power Cord: Connect this plug to an AC outlet. If the outlet is switch controlled, make cer- tain that the switch is in the ON position.

Coaxial-Digital Output: Connect this jack to the coaxial-digital input of a digital audio/video receiver or an external digital-to- analog converter for direct access to the digital signals of the FL 8380. DO NOT connect this jack to the standard audio inputs of any device.

Remote Control Output: Connect this jack to the input of another compatible Harman Kardon remote controlled device to have the remote sensor on the FL 8380 provide signals to other products.

Remote Control Input: Connect the out- put of a remote infrared sensor or the remote control output of another compatible Harman Kardon product. This will enable the remote con- trol system to operate even when the front panel Remote Sensor D is blocked. It will also allow use of the FL 8380 with optional, external control systems.

Analog Audio Outputs: Connect these jacks to the analog CD audio inputs of your receiver, surround processor or preamplifier.

6REAR PANEL CONNECTIONS