Harman FL 8380 owner manual Remote Control Functions, E to be effective

Remote Control Functions

0Disc-Select:Press one of these buttons to select the disc in a specific position in the CD drawer.

1Numeric Buttons: Press these buttons to select a specific track on a disc. The FL 8380 will immediately go to the track and begin to play it. These buttons are also used to enter track num- bers into the memory for preprogrammed-play lists. (See page 13 for complete information on programming the FL 8380.)

2Clear: Press this button to remove tracks from a programmed sequence. Each press of the button will remove one track, starting with the last track programmed to play. (See page 13 for complete information on programming the

FL 8380.)

3Search: Press these buttons to search for- ward —or backwards ‚through a disc to locate a particular portion of the selection being played.

4Skip: Press one of these buttons to move to the next track fl·or to move back to the previ- ous track ‡fion the disc being played.

5Stop: Press this button to stop the disc cur- rently being played.

6Play: Press this button to start the play- back of a CD. If the CD drawer is open, pressing this button will automatically close the drawer.

7Random: Press this button to play all tracks on one or more CD’s in random order. (See page 11 for more information.)

8Pause: Press this button once to momen- tarily pause a disc. When the button is pressed again, the disc will resume play from the point at which it was paused.

9Program: This button is used to program the playback of discs and tracks in a particular order. (See page 13 for complete instructions on programming the FL 8380.)

ATime: In normal operation, the display will show the running time of the track being played. Press the button once to check the time remain- ing for the track in play. Press the button again to view the total play time remaining for the disc in play.

BIntro: Press this button to put the FL 8380 into the Intro Scan mode. When you press this button, the unit will play the first 10 seconds of each track on the disc, and then move to the next track. Press the button again to defeat the function and continue full play of the current track. (See page 12 for more information.)

CRepeat: Press this button once to continu- ously repeat the track currently being played. Press it a second time to repeat the entire disc and a third time to repeat all discs. (See page 13 for more information).

DDisc-Skip:Press these buttons to change to the next or former disc. If a disc position is empty, the FL 8380 will automatically search for the next position that contains a disc unless the disc drawer is open.

EPower On Button: When the FL 8380 is plugged into an active AC outlet, press this button to turn the unit on. The Status Mode Indicator 1 will turn green. If the unit is plugged into a switched outlet, power must be applied to the switched outlet in order for the Power On button

Eto be effective.

FPower Off Button: Press this button to turn the unit off; the Status Mode Indicator 1 will turn amber, indicating that the unit is in a Standby mode.

8REMOTE CONTROL FUNCTIONS