2.Dub part or all of a CD, MiniDisc or other compatible external digital source from another machine into the
CDR 26 using CD Sync
Step 1: The CD Sync function will only work with compatible digital input sources such as CD or MiniDisc players that send proper track data and
Step 2: Place a blank
Step 3: Set up your source machine so that it will be ready to play.
Step 4: Press the CD Sync button ONCE to record ONE TRACK, and TWICE to record ALL TRACKS from the external source.
Step 5: Start the playback from the external source machine; the CDR 26 will automatically begin recording.
Step 6: When the recording has ended, wait until the track and time information reappears on the display.
Step 7: Before you can play your newly recorded disc in another CD player you MUST finalize it to complete the recording process. First press the Finalize Button. The Record Indicator will light and FINALIZE will flash in the Information Display. Within eight seconds press the Play/Select Button. A TOC WRITE N:NN message will appear. The N:NN part of the message is a countdown clock that will show the time remaining in the finalization process. When the display counts down to 0:00 and the Record Indicator goes out, the Information Display will return to its normal indications and the finalization process is complete. The disc is now ready to be played in any compatible CD or DVD player.
3. Dub a compilation or mix of one or more CDs using the two decks of the CDR 26
Step 1: Insert a blank
Step 2: Insert a source CD into the Play deck (left drawer).
Step 3: Use the
Step 3a: If you are using the remote, press the CDP button to select the Play deck.
Step 3b: Press the Program button.
Step 3c: Using the numeric keys on the remote, enter the first track number. If you are using the
Step 3d: Repeat Step 3c until you have programmed the desired tracks from that disc – up to a total of 20.
Step 4: The Prog indicator must be lit in the display in order for your playlist to be recorded (rather than the entire disc). If it is not lit, simply press the Prog button on the remote to light it.
Step 5: To make a dub at twice normal speed, press the SPEED button on the front panel or remote once so that the “x2” indicator lights. Compilation dubs may be made at either standard or twice normal speed, but they may NOT be made at the “x4” speed, even though the “x4” indicator may light.
Step 6: Press the Dubbing button and wait for the track and time displays for both discs to appear after the CDR 26 has finished calculating whether there is enough room on the blank disc to record your playlist.
Step 7: Press the Play button on the Play deck side, or the Play/Select button on the Record deck side, or on the remote, to start the playlist. The CDR 26 will automatically dub only the selected tracks onto the blank disc.
Step 8: When the recording has ended, wait until the track and time information for the Record deck reappears on the
Step 9: To add tracks from another disc, remove the first source disc from the Play deck and insert the new source disc. Follow the instructions in Section 1 to dub the entire new disc, or go back to Step 3 in this section to program and record a compilation from the new disc.
Step 10: Before you can play your newly recorded disc in another CD player you MUST finalize it to complete the recording process. First press the Finalize Button. The Record Indicator will light and FINALIZE will flash in the Information Display. Within eight seconds press the Play/Select Button. A TOC WRITE N:NN message will appear. The N:NN part of the message is a countdown clock that will show the time remaining in the finalization process. When the display counts down to 0:00 and the Record Indicator goes out, the Information Display will return to its normal indications and the finalization process is complete. The disc is now ready to be played in any compatible CD or DVD player.