®

®

Power for the Digital Revolution. Power for

the digital revolution.™

4. Make a recording from an external analog source, such as a radio, a turntable or a cassette deck

Step 1: Insert a blank disc into the Record deck (right drawer).

Step 2: Press the Input Selector button until Analog appears in the display.

Step 3: Press the Record button so that the Record indicator flashes in the display.

Step 4: Make sure you can hear the source through your receiver. Cue it up to the start point.

Step 5: The CDR 26 will automatically increment (increase) the track number on the recording each time the source record or tape changes to a new track. In this Auto mode, the CDR 26 will automatically increment the track number after three seconds of silence, and it will stop the recording after ten seconds of silence. This can result in wasted, empty tracks if your source is not cued up correctly, or has long pauses between tracks. To avoid this, you may wish to use manual mode. Select it by pressing the Auto/Manual button. You will have to remember to increment the track number for each new track.

Step 6: Press the Play/Select button on the Record deck side to start recording, and start the source playback.

Step 7: When the program material begins playing, the recording-level meters on the CDR 26 will display the relative loudness of the input, using blue and red dashes. The level-control knob adjusts the recording level only for analog recordings. Turn it counterclockwise to lower the level if the OVER indicators light continuously, or turn it clockwise to increase the level so that the red dashes appear only occasionally during the loudest passages.

Step 8: If you are using manual track increment mode, remember to press the Track Increment button each time you wish the CDR 26 to increase the track number. Note that the CDR 26 will NOT stop automatically after ten seconds of silence in this mode; you must press the Stop button to end the recording session.

Step 9: The CDR 26 will not record more than 99 tracks onto the same blank disc. When only four seconds remain on the record disc, the display will warn you that the recording is about to end by displaying a “DISC FULL” message.

Step 10: When the recording has ended, wait until the track and time information reappears on the display.

Step 11: Before you can play your newly recorded disc in another CD player you MUST finalize it to complete the recording process. First press the Finalize Button. The Record Indicator will light and FINALIZE will flash in the Information Display. Within eight seconds press the Play/Select Button. A TOC WRITE N:NN message will appear. The N:NN part of the message is a countdown clock that will show the time remaining in the finalization process. When the display counts down to 0:00 and the Record Indicator goes out, the Information Display will return to its normal indications and the finalization process is complete. The disc is now ready to be played in any compatible CD or DVD player.

5. Make a recording from an external digital source, such as a CD player, DAT machine or MiniDisc player

Step 1: Insert a blank disc into the Record deck (right drawer).

Step 2: Press the Input Selector button until the appropriate front or rear coax or optical digital input name appears in the display, depending on which digital input your source (e.g., MiniDisc player) is connected to.

Step 3: Press the Record button so that the Record indicator flashes in the display.

Step 4: Set up your source, and make sure you can hear it play through your receiver.

Step 5: The CDR 26 will automatically increment (increase) the track number on the recording each time the source player changes to a new track, preserving the track information on the original digital recording. If the source does not have track information, or if you want to number the tracks on your recording differently from the original, you will have to remember to increment the track number for each new track by pressing the Track Increment button on either the front panel or remote.

CDR 26 – How to Make Recordings 3

Page 2 Page 4
Page 3
Image 3
Harman-Kardon CDR 26 owner manual Power for the Digital Revolution. Power for
Page 2 Page 4

CDR 26 specifications

The Harman-Kardon CDR 26 is a sophisticated CD recorder that combines high-quality audio playback with recording capabilities, catering to audiophiles and casual listeners alike. Renowned for its sleek design and user-friendly interface, the CDR 26 has become a popular choice for those looking to preserve their favorite music from CDs or other sources onto writable CDs.

One of the standout features of the CDR 26 is its dual disc operation, allowing users to seamlessly switch between a CD playback source and a recording medium. This feature enhances the recording process, making it efficient and straightforward. The device supports various disc formats, including CD-R and CD-RW, giving users the flexibility to burn their music onto a variety of media.

The CDR 26 employs advanced recording technologies that ensure optimal audio fidelity. With a high-quality 24-bit/96kHz digital-to-analog converter, it provides rich sound reproduction that faithfully captures the nuances of the original recordings. Additionally, the device boasts a variety of recording modes, including on-the-fly recording, which allows users to create compilations without the need for a computer.

Another remarkable characteristic of the CDR 26 is its integrated digital signal processing (DSP) features. The built-in DSP allows for various editing functions, such as track splitting and adjusting levels, making it easier for users to create professional-quality recordings. The intuitive interface includes an LCD screen that displays pertinent information, including track numbers, remaining recording time, and more, making navigation clear and efficient.

Furthermore, the Harman-Kardon CDR 26 includes extensive connectivity options. With optical and coaxial digital inputs, as well as traditional analog inputs, users can connect it to a variety of audio sources, including turntables and tape decks. This versatility makes it an ideal component in a comprehensive audio system.

In summary, the Harman-Kardon CDR 26 is a feature-rich CD recorder that excels in both audio quality and usability. Its dual disc operation, advanced recording technologies, integrated DSP capabilities, and versatile connectivity options make it a valuable tool for anyone who wishes to curate and preserve their musical collections while enjoying high-fidelity sound. Whether for personal use or as part of a larger audio setup, the CDR 26 represents a reliable choice for all your CD recording needs.
Top Page Image Contents