REMOTE CONTROL FUNCTIONS
to select a numbered location (1 through 8) within the bank. Press the Memory Button to complete the process and let the HK 3490 return to normal operation.
Menu: This button has no effect on the HK 3490, but is used with some source devices to access the source’s setup menus.
Navigation (⁄/¤/‹ / › ) and OK Buttons: When XM Radio is in use, the ‹ / › Buttons may be used to change the channel category or the lettered bank of presets. As described above, press the FM Mode Button to select a search mode. Use the ⁄/¤ Buttons to change the numbered preset within a bank when in Preset Search mode, or to change the channel sequentially when in All Channel Search mode. These buttons have no other effect on the HK 3490, but are used to make selections within the
Preset Scan: Press this button once to scan through the stations you have previously programmed as presets. Each station will play for five seconds before the tuner skips to the next preset station. Press the button a second time to select the current station. If no presets have been programmed, the 0 PRESET message will be displayed. When XM Radio is in use, this button has nothing to do with preset stations. Instead, each press of this button changes the information displayed on the front panel as follows: channel name and number, channel category, artist name and song title.
Disc Menu: This button has no effect on the HK 3490, but is used with some DVD players to access the DVD disc’s menus.
Volume Controls: Use this control to raise or lower the volume, which will be shown in decibels (dB) in the Message Display.
Mute Button: Press this button to mute the HK 3490’s speaker and headphone outputs temporarily. To end the muting, press this button or adjust the volume. Muting is also canceled when the receiver is turned off. When the Subwoofer Trigger Output is connected to the correct input on the subwoofer, and the corresponding Subwoofer Link Switch is on, muting the HK 3490 will remove the trigger signal, turning off the subwoofer’s amplifier to conserve energy. When normal listening resumes, the trigger signal will be reactivated, turning on the subwoofer.
Tuning: Use this control to tune a radio station. Tap one end of the button briefly to tune one frequency step at a time, or press and hold it to seek the next frequency with an acceptably strong signal. When XM Radio is in use, the digitally tuned channels are always of acceptable strength, and thus there is no seek function, although pressing and holding the Tuning Buttons scans through the channels faster. When the FM Mode Button has been used to activate Category Search Mode, the Tuning Buttons will only tune channels within the current category. Press the FM Mode Button until All Channel Search Mode has been selected to tune any channel.
Preset Stations Selectors/Track Skip: Press these buttons to select a preset radio station, or to change tracks or chapters on compatible Harman Kardon DVD and CD players. XM presets are stored in one of five lettered banks. To switch banks, press the FM Mode
Button repeatedly until the PRESET SEARCH message appears in the Message Display, and use the ‹ / › Buttons to change to the desired bank. Then use the Preset Stations Selectors to select the numbered preset within the bank.
Stop, Record, Pause and Play: These transport controls have no effect on the receiver, but are used to control compatible Harman Kardon DVD and CD players.
Fast Search: The Fast Search function is available with compatible Harman Kardon DVD and CD players.
Dimmer: Press this button to partially or fully dim the
Repeat (V. Mode): This button has no effect on the HK 3490, but issues the Repeat command when used with DVD and CD players. On some remotes this button is labeled “V. Mode,” but it still issues the Repeat command.
Sleep: Press this button to activate the sleep timer, which shuts off the receiver after a programmed period of time up to 90 minutes.
14
