•The HK 3490 does not switch the last-selected video source when an audio-only source, such as Phono, CD or Tape/CDR, is selected subsequently. It is not possible to view video while listening to an audio-only source.

Using the Tuner (AM, FM and XM Modes)

The HK 3490’s built-in tuner may be selected in one of two ways (see Figure 37):

1.Press the front-panel AM or FM Button. The front-panel FM Button toggles between the FM and XM bands.

2.Press the AM, FM or XM Button on the remote.

Figure 37 – Tuner Input Selection

Radio stations may be selected in one of five ways (see Figures 38 – 40):

1.If you know the frequency number, enter it directly by first pressing the Direct Button on the remote, and then using the Numeric Keys. It is not necessary to press the Direct Button when XM Radio is in use.

2.After you have programmed preset stations (see below), either enter

the preset number (1 through 30) using the remote or use the front- panel Preset Stations Button to scroll through the list of presets. When XM Radio is in use, first press the FM Mode Button repeatedly to select Preset Search mode. Then use the ‹ / › Buttons to select a lettered bank of presets. To select a numbered preset within a bank, make sure the HK 3490 is in Preset Search mode, then use the Numeric Keys, the ⁄/¤ Buttons or the Preset Stations Buttons.

3.In Auto Tuning mode, press and hold the Tuning Buttons (front-panel or remote) to scan in the chosen direction until a station with acceptable signal strength is detected.

4.In Manual Tuning mode, with each press of the Tuning Buttons the HK 3490 will tune the next frequency increment (0.1MHz for FM, or 10kHz for AM) in the selected direction.

NOTE: When XM Radio is in use, there are no auto or manual tuning modes. Use the Tuning Button or ⁄/¤ Buttons (only when in All Channel Search mode) to select a channel. Press and hold the button to search faster.

5.Press the Preset Scan Button on the front panel or remote to scan through the previously programmed preset stations. The tuner will pause for five seconds at each frequency before tuning to the next preset. Press the Preset Scan Button again to select the current station and stop scanning. When XM Radio is in use, this button is used to change the display as follows: channel name and number, category, artist and song title.

OPERATION

Figure 38 – Tuning a Station

When an FM station has been tuned, pressing the FM Mode Button will switch between stereo and mono tuning, which may improve reception of weaker stations. See Figure 39.

Figure 39 – FM Mode Button

To store a station in one of the 30 AM/FM presets (see Figure 40):

1.Tune the desired station.

2.Press the Memory Button on the remote.

3.Use the Numeric Keys to enter the desired preset number. To clear a station from the preset memory:

1.Tune the preset station using any of the methods described above.

2.Press the Memory Button.

3.Within five seconds, press the Clear Button.

Figure 40 – Programming Presets

When XM Radio is in use, programming presets is somewhat different.

1.Tune to the desired channel.

2.Press the Memory Button on the remote.

3.Use the ‹ / › Buttons to select the desired preset bank (A through E).

4.Use the ⁄/¤ Buttons to select a numbered location (1 through 8).

25

Page 24 Page 26
Page 25
Image 25
Harman-Kardon HK3490 owner manual Using the Tuner AM, FM and XM Modes, Press the AM, FM or XM Button on the remote
Page 24 Page 26

HK3490 specifications

The Harman-Kardon HK3490 is an exceptional stereo receiver that combines power, versatility, and timeless design to cater to audiophiles and casual listeners alike. Known for its impressive sound quality, the HK3490 is a solid choice for anyone looking to enhance their home audio experience.

One of the standout features of the Harman-Kardon HK3490 is its powerful amplification. With a 120 watts per channel output, this receiver is capable of driving even demanding speakers with ease. Whether you're enjoying a quiet evening at home or hosting a lively gathering, the HK3490 delivers clean, dynamic sound that fills any room. The unit is equipped with an advanced high-current, low-impedance design, ensuring robust performance across a wide range of speakers.

In terms of connectivity, the HK3490 is equipped with an array of options. It offers multiple audio inputs, including six stereo line inputs, a dedicated phono input for vinyl enthusiasts, and a 2-channel tape monitor, allowing users to connect various audio sources seamlessly. The receiver also features a built-in AM/FM tuner with 30 presets, making it easy to enjoy your favorite radio stations.

The HK3490 further incorporates sophisticated technologies designed to enhance sound quality. Harman-Kardon's proprietary technologies, such as the Logic 7 processing, provide a rich, immersive audio experience that preserves the integrity of the original recording. This technology ensures that stereo signals are transformed into a surround sound experience, making your music, movies, or games more engaging.

Another important aspect of the HK3490 is its aesthetic appeal. The receiver features a sleek, classic design with a brushed aluminum front panel complemented by a large, easy-to-read display. The intuitive layout of knobs and dials makes it user-friendly, allowing for easy adjustments to volume and tuning.

Moreover, the HK3490 is designed with durability in mind. Its robust construction ensures that it can handle the rigors of daily use, while its thermal protection circuits prevent overheating, allowing for reliable performance over extended periods.

In summary, the Harman-Kardon HK3490 is a versatile, high-performance stereo receiver that caters to a wide range of audio needs. With its powerful amplification, extensive connectivity options, and advanced sound technologies, it stands out as a premium choice for anyone looking to elevate their listening experience. Whether you are a seasoned audiophile or simply enjoy quality sound, the HK3490 is a worthy addition to any audio setup.
Top Page Image Contents