Remote Control Functions
The remote is capable of operating the HK 3380 and most Harman Kardon CD changers or players, CD Recorders and Tape decks, using the control codes that are part of the remote.
åMain Power On: When the HK 3380 is in the Standby mode, as indicated by the Power Indicator 3glowing amber, press this button to turn the HK 3380 on.
∫Main Power Off: When the HK 3380 is turned on, press this button to place it in the Standby mode. Note that in this condition, the unit is still connected to AC Power.
çSource Selectors: Press these buttons to select an input source for the HK 3380.
NOTE: The first press of the Video 3 Source Selector çwill select the device connected to the
Inputs 1.
∂Preset Up/Down: When the tuner is in use, these buttons scroll through the stations that have been programmed into the HK 3380’s memory. These buttons also control the track Skip Up and Down on compatible Harman Kardon compact disc players/changers,
≠Transport Controls: These buttons are used to control Play, Play Forward, Play Reverse, Stop, Pause and Record functions on compatible Harman Kardon compact disc players/changers and cassette tape decks. Also, when a compatible Harman Kardon compact disc player or changer, or cas- sette deck, has been selected using the Source Selectors ç, additional transport control func- tions are available using the Preset Up/Down
∂ and Tuning Up/Down ü buttons.
ƒDisc Skip: These buttons do not have any functions when controlling the HK 3380, but they operate the Disc Skip functions of compatible Harman Kardon compact disc changers.
©Sleep Button: Press this button to place the unit in the Sleep mode. Each press of the button selects the amount of time that will remain before the unit will automatically go into the Standby mode, as shown in the Main Infor- mation Display Û, in the following order:
|
|
| 90 |
|
| 80 |
|
|
| 70 |
|
| 60 |
| 50 |
| |||
|
|
| min |
|
|
| min |
|
| min |
|
|
| min |
|
| min |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 40 |
|
|
| 30 |
|
| 20 |
|
|
| 10 |
|
| OFF | |||
|
|
| min |
|
|
| min |
|
| min |
|
|
| min |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Holding the button pressed for some seconds will directly turn off the Sleep time selection.
˙Dimmer Button: Press this button once to reduce the brightness of the front panel display to half the normal intensity. Press it again to turn the front panel display completely off. When the display is completely off, press the button to return to normal brightness.
îMain Tuning Buttons: When the tuner is in use, these buttons will tune up or down through the selected frequency band. A brief press of the button will manually tune to the next frequency increment, while pressing and holding the button for a longer period (>0.5 sec) will step quickly through the frequencies. As soon as the button is released the unit will automatically tune to the next station with a signal strong enough for acceptable reception. When a HK CD Recorder is in use these buttons will select the transport (Play or Record Deck).
∆Direct Button: Press this button to select a radio station by entering its frequency using the Numeric Keys. (See page12 for more informa- tion.)
˚Numeric Keys: These buttons serve as a
¬Auto Preset: When the tuner and FM band have been selected, this button may be used to automatically program the tuner presets for all stations with acceptable signal strength.
To start the auto preset scan, press and hold the button. Note that the MEMORY and PRESET indicators will flash. Keep holding the button pressed until the tuner will start to “look” for stations, as shown by increasing frequency num- bers in the Information Display. Release the but- ton and note that the tuner will search the entire FM band and stop briefly at each station that has acceptable signal strength. The HK 3380 will automatically assign a preset number to each station and then search for the next station. If the FM tuner finds fewer than 30 FM stations with acceptable signal strength, the Auto Preset tuning will scan two more cycles or until the remaining vacant preset memory spaces have been filled with those found in the first scan. The scan will stop when all 30 preset memory spaces have been filled or when three scans through the band have been completed (see page 13 for more information).
µSecondary Control Cover: This sliding cover normally hides the secondary controls. To access these controls, gently press the cover down and towards you.
ÑClear Button: This button is used to clear preset memory information for the HK 3380’s tuner. (See page 13 for more information on tuner presets.)
øMemory Button: Press this button to open a memory position that stores a preset location for the HK 3380’s tuner. (See page13 for more information on tuner presets.)
πMaster Volume: Press these buttons to raise or lower the HK 3380’s volume.
œP. Scan Button: Press this button to auto- matically scan through the list of stations that are programmed into the HK 3380’s tuner memory. When the button is pressed, each preset station will play for five seconds before the next station is selected. Press the button again when the desired station is heard to stop the preset scan.
®Mute Button: Press this button to momen- tarily silence the HK 3380.
ßFM Mode Button: Press this button when the tuner is in use in the FM band to switch to monaural reception if the stereo station is weak and noisy. (See page12 for more information.)
†Tuning Up/Down: When the tuner is in use, these buttons work in the same way as the Main Tuning buttons î described above. But if CD or Tape is in use, these buttons will also control Fast Forward and Fast Reverse (or Rewind) for compatible Harman Kardon compact disc players/changers,
üSpeaker 1 Selector: Press this button to turn the speakers connected to the Speaker 1
Output terminals | on or off. |
√Speaker 2 Selector: Press this button to turn the speakers connected to the Speaker 2
Output terminals | on or off. |
∑Transmitter Window: Point this area of the remote toward the receiver when using the remote.
≈Enter Button: This button has no function on the HK 3380, but may be used as the Enter key for a compatible Harman Kardon DVD Player or as the Random Play button for a compatible CD Player. (See page 16 for more information on using the remote to control other devices.)
¥RDS Display Button: Press this button to view the various displays of the RDS options that are available when a station is transmitting RDS data. (See pages
ΩRDS PTY Button: Press this button to start a search for a specific PTY type using the RDS capabilities of the HK 3380. (See pages
REMOTE CONTROL FUNCTIONS 9
