Harman-Kardon HS 250 owner manual Rear Panel Connections

Rear Panel Connections

￿TV Audio Input: If your screen is connected to the HS by an HDMI, Component, S-Video or Composite cable, connect the analog output of your TV to this input. If you have your TV connected to the HS with a Scart cable, an audio connection to the TV Input is not necessary.

Note: You’ll find more details about all Audio/Video connections under Setup and Connections on the following pages.

￿Coaxial Digital Output: Connect this jack to the matching digital input connector on a digital recorder such as a CD-R or MiniDisc recorder.

￿Subwoofer Trigger Output: Connect this trigger output to the trigger input of the Harman Kardon subwoofer, so that the subwoofer will switch on and off at the same time as the rest of the system.

￿USB On-The-Go Input: This input may be used to temporarily connect a USB thumb device or portable hard disk for direct playback of audio, image of video files, a digital photo camera or a USB hub.

￿HDMI Output: Connect this output to the HDMI input of high-definition LCD, Plasma or video projector for the best possible picture quality.

￿Remote IR Output: This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.

￿ Digital Media Player (DMP) Connector: With the HS 250 turned off, con- nect one end of the optional Harman Kardon

to this proprietary connector, and the other to your compatible Apple iPod. When the Digital Media Player source is selected, you may view your iPod’s control and navigation messages on your video display (if one is connected to one of the Video Monitor Outputs ￿￿￿￿￿), and in the Upper and Lower Display Lines E. You may navi- gate the iPod and select tracks for playback using the ⁄/¤/‹/› Buttons 9 and the Set Button 6.

10REAR PANEL CONNECTIONS