Rear Panel Connections
|
|
ENGLISH
|
|
|
Composite Video Output
Component Video Outputs
Scart TV Output
AC Power Cord
FM Antenna
Audio In
Composite Video Output: Connect this jack to the video input on a television or video projector.
Component Video Outputs: These out- puts carry the component video signals for connection to display monitors with component video inputs. For standard analog TV's or projectors with inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these outputs to the correspon- ding inputs. If you have a
IMPORTANT: These jacks should NOT be con- nected to standard composite video inputs.
SCART OUT (TV): If your TV has a SCART socket, you can connect a SCART cable to your TV and to your DVD Player for improved video quality. The SCART cable carries both audio and video. You can select Composite Video or RGB video for that SCART connector’s video output signal.
Subwoofer Output
Coaxial Digital Input
Optical Digital Input
Analog Audio Outputs
Front Speaker Outputs
Remote IR Input
TV Audio In
AC Power Cord: Connect this plug to an AC outlet. If the outlet is controlled by a switch, make certain that it is in the ON position.
FM Antenna: Connect to the supplied FM antenna.
Audio In: Connect to a
Subwoofer Output: Connect to the SUB/LFE input on the subwoofer.
Coaxial Digital Input: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digi- tal output of an LD player to these jacks.
Optical Digital Input: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source.
Analog Audio Outputs: Connect these jacks to the analog audio input on a TV set or external audio system for analog audio playback or to the RECORD/INPUT jacks of an audio recorder for recording.
Coaxial Digital Output
Subwoofer Trigger Output
USB
HDMI Output
Remote IR Output
DMP Connector
Front Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. In conformance with the new CEA color code specification, the White terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Left speaker with the older color coding, while the Red terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Right speaker. Connect the black
Remote IR Input: If the HS 250’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.
REAR PANEL CONNECTIONS 9
