Harman-Kardon HS 250 Front Panel Controls,  Main Information Display USB On-The-Go Input

Front Panel Controls

ENGLISH

 Main Information Display	3 USB On-The-Go Input	6 Slot Loader
1 Power On/Off (Standby)	4 Headphone Jack
2 Eject	5 Volume Control

Main Information Display: This display delivers messages and status indications to help you operate the HS 250 Controller.

1Power On/Off (Standby): Press the button once to turn the HS 250 Controller on, press it again to put the unit in the Standby mode.

Note that when the HS 250 Controller is switched on, the Power Indicator around the button turns white.

2Eject: Press this button to release a disc from the loader.

3USB On-The-Go Input: This input may be used to temporarily connect a USB thumb device or portable hard disk for direct playback of audio, image of video files or a USB hub. The USB inputs are designed to power a single USB device at a time. If additional hard disks are connected through a hub it is necessary that additional external power supplies are used to power the hub and hard disks.

4Headphone Jack: This jack may be used to listen to the system's output through a pair of headphones. Be certain that the headphones have a standard 3.5 mm stereo phone plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.

5Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the system is muted, adjusting volume control will automatically release the unit from the silenced condition.

6Slot loader: Gently insert a CD or DVD into this slot, with the printed side of the disc facing up. Note there is no drawer. Press the Eject Button 2 to release the disc.

FRONT PANEL CONTROLS 7