SOUNDSTICKS® III
Specifications*
System
Frequency range: 44Hz – 20kHz
Power consumption: 4W idle, 65W maximum
Subwoofer |
|
|
|
|
|
| |
Transducer (1): 6” woofer |
| R | L | R | L |
| |
Amplifier output power: 20W RMS |
|
|
|
|
|
| |
Dimensions (W x H): | Step 1. Place individual | Step 2. Place subwoofer | Step 3. Connect satellite | Step 4. Insert | |||
(232mm x 258mm) | |||||||
SoundSticks® III (satel- | as desired, but place- | cables to the dual | SoundSticks III input | ||||
Weight: 4 lb (2.2kg) | |||||||
lites) beside monitor/ | ment under your desk | subwoofer cable. Also | cable into the computer | ||||
| |||||||
Satellite | computer. | will provide optimal | connect the input cable | or other audio device. | |||
| performance. |
| to the subwoofer input |
| |||
Transducers (4): 1” |
|
|
| ||||
|
|
| cable jack. |
|
| ||
Amplifier output power: 10W RMS per |
|
|
|
|
| ||
|
|
|
|
|
| ||
channel |
|
|
|
|
|
| |
Dimensions (W x H): 2” x 10” |
|
|
|
|
|
| |
(51mm x 254mm) |
|
|
|
|
|
| |
Weight: 1.5 lb (0.7kg) |
|
|
|
|
|
| |
Troubleshooting
Symptom | Possible problem | Solution |
|
|
|
No sound from SoundSticks III | No power to subwoofer. | Ensure power supply is connected to live power source and is |
speaker system. |
| properly connected to subwoofer. Please note: When subwoofer is |
|
| powered, a power LED should light. |
| Power adapter plug not inserted | Place plug with arrow symbol facing UP into the subwoofer. |
| correctly. |
|
| No volume or low volume. | Touch the volume “Up” (+) pad on the volume control satellite to |
|
| unmute and/or increase the system volume level. |
|
| Note: Touching the volume “Down” |
|
| volume. Touching both (+) and |
|
| time will mute the system. |
|
|
|
*These specifications are subject to change without notice.
4
