11.Optional Hot Water Coil (Not Available For Mark I)

PLUMBING DIAGRAM FOR THERMO-SIPHON METHOD - MAX. DISTANCE 10 FT.

COIL INSTALLATION (See Coil Diagram on Page 14)

Place one of the nuts supplied on each leg of the coil. Place coil through the holes in the back of the firebox and adjust the nuts so the pipes stick out about 1 1/4 to 1 1/2 inches from the side of the stove. Put flat washers and nuts on the outside and tighten within 1/4 inch. Then place fiberglass rope around each pipe the washers and tighten. You are now ready to run pipes.

THERMO-SiPHON METHOD (LESS THAN 10 FEET)

This is the simplest and most economical method, however, the hot water tank must be less than ten feet from the stove. The water inlet, where the temp./press/relief valve is located, must be higher than the top leg of the coil. The hot water tank should be elevated, if necessary, to allow for proper thermo-siphon action (the method by which hot water will circulate automatically through the system.)

a)Shut off the hot water heater and the old water supply to it. Drain the tank completely.

b)Remove the temp./press/relief valve and discard. Install a short 3/4" nipple and tee (1) along with a new temp./press/relief valve.

c)Run 3/4" copper tubing along with the necessary fittings between the hot water tank and the top leg of the water coil. Install a 3/4" vent elbow and automatic “float type” air vent (2) in the high point of the line. Within two feet of the top leg of the water coil install a 150 lb. pressure relief valve. (7) Run 3/4" tubing from the release exit of both relief valves downward (3) so the hot water may escape the event of overheating.

d)Remove the drain valve at the bottom of the tank. Install a short 3/4" nipple and tee and re-install the drain valve to the tee (4). Run 3/4" copper tubing with the necessary fittings between the drain/tee combination and the lower leg of the coil. After all of the connections have been complete, you may refill the tank. Turn on the hot water heater only after the tank has been completely refilled.

9

Page 10 Page 12
Page 11
Image 11
Harman Stove Company III manual Optional Hot Water Coil Not Available For Mark, Coil Installation See Coil Diagram on
Page 10 Page 12

I, III, II specifications

Harman Stove Company, a well-respected name in the heating industry, has been providing reliable and efficient heating solutions for more than four decades. Known for their innovative designs and commitment to quality, Harman offers a range of stoves that cater to diverse heating needs. Among their most popular models are Harman Stove Company I, II, and III, each boasting unique features and advanced technologies.

Harman Stove Company I is recognized for its compact design and efficiency, making it an ideal choice for smaller spaces. This stove is equipped with Harman’s patented Automatic Ignition System, which ensures easy and reliable start-ups, even in the coldest weather. With a heat output capacity that is suitable for a moderate area, the stove combines functionality with style, featuring a sleek and contemporary look that fits into various home decors. The Harman I also emphasizes user-friendly controls, allowing homeowners to adjust settings easily.

The Harman Stove Company II enhances the foundation laid by its predecessor by offering increased heating performance and fuel flexibility. This model is designed to burn both wood pellets and corn, providing homeowners with versatile options depending on fuel availability and price. The innovative Heat Management System ensures that the heat is evenly distributed throughout the room, promoting comfort and warmth. Additionally, the stove features a large viewing window, showcasing the beautiful flames and adding an inviting atmosphere to any space. The Harman II also includes a built-in diagnostics system, which monitors performance and alerts users to any potential issues.

Finally, the Harman Stove Company III represents the pinnacle of their product line, characterized by its robust construction and high-efficiency ratings. This stove is designed for larger spaces, offering substantial heat output without compromising on energy efficiency. The Harman III includes advanced technologies, such as the Smart Control System, allowing for precision temperature management and programmable settings. It features a unique airflow design, which maximizes combustion efficiency while minimizing emissions, making it an eco-friendly option. With an impressive warranty and high-quality materials, the Harman III is built to last and provide reliable heating for years.

In summary, the Harman Stove Company I, II, and III represent a commitment to innovation, efficiency, and reliability in home heating solutions. Each model caters to different needs and preferences, ensuring that there is a Harman stove for everyone. With advanced technologies and user-friendly features, Harman continues to set the standard in the pellet and wood stove market.
Top Page Image Contents