Maintenance

Cleaning the Door Glass

•Always use a soft cloth and glass cleaner (such as Windex, or a mixture of vinegar & water) to clean the glass.

•Do not use razor blades or any other hard object to scrape the glass.

Combustion

Blower Cover

Blower Cover

Latch

Fig 26

 

Heat Exchanger Fins

Scraper

Flue

Outlet

Blower

Wheel

Blower Cover

Latch

Removing Ashes:

When approximately 1 ton of pellets has been burned, it will be necessary to empty the ash pan.

Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed on a noncombustible floor or on the ground, well away from all com- bustible materials, pending final disposal. If ashes are disposed of by burial in soil or other- wise locally dispersed, they should be retained in the closed container until all cinders have thoroughly cooled.

1.Pull on latch handle and remove ash pan. Use ash pan handle to carry and dispose of ashes.

2.Slide the ash pan back into the stove and latch the door by pushing down on the latch handle.

Cleaning:

The stove should be cleaned after burning ap- proximately 1 ton of pellets (50 bags). The cleaner the stove the more efficient it will be. You will burn less pellets and heat output will be greater.

Note: Higher ash content pellets will require more frequent cleanings.

1.Shut down stove and disconnect power cord to insure that all motors are stopped.

2.Clean heat exchanger with scraper as shown in fig 27.

3.Brush or scrape the inside of the stove to remove fly ash.

4.Scrape burnpot with flat end of scraper provided with the stove. Inspect the holes on the burnpot surface. See Fig. 33.

5.Open burn pot clean-out. Clean fly ash from burn pot and replace cover.

6.Remove ash pan.

7.Remove combustion blower cover by turning the blower cover latch vertical, see Fig.26. Sliding the cover out of the slot on the left.This will expose the combustion blower wheel and flue outlet,

Fig.27.

Fig 27

22 P43 Pellet Stove

Page 21 Page 23
Page 22
Image 22
Harman Stove Company P43 owner manual Maintenance, Cleaning the Door Glass, Removing Ashes
Page 21 Page 23

P43 specifications

The Harman Stove Company P43 is a sophisticated pellet stove renowned for its efficiency, versatility, and modern design. Tailored for homeowners who seek both functionality and aesthetic appeal, the P43 offers a compelling option for heating spaces while contributing to an environmentally friendly lifestyle.

At the heart of the P43 is its impressive heating capacity. It can warm areas up to 1,200 square feet, making it suitable for a variety of home sizes. Its heat output ranges from a low of 8,200 BTUs to a maximum of 43,000 BTUs, allowing users to customize heating levels according to their needs. This adaptability is further enhanced by the unit's easy-to-use control settings that enable precise adjustments for different heating requirements and comfort levels.

One standout feature of the P43 is its efficient heat exchanger system. This technology promotes optimal combustion, ensuring that the maximum amount of heat is produced while minimizing waste. As a result, not only does this contribute to cost-effective heating, but it also enhances the stove's environmental performance by reducing emissions. The P43 is certified by the EPA, confirming its compliance with stringent environmental standards.

The P43 also integrates advanced automation technologies, such as Touch Control Technology, which simplifies the operation of the stove. Users can easily manage settings through a digital interface, allowing for setting timers, adjusting burn rates, and monitoring fuel levels. This level of automation makes it particularly appealing for tech-savvy homeowners who appreciate convenience in their heating solutions.

Another defining characteristic of the P43 is its design. With a sleek, modern look, the pellet stove is available in different finishes, allowing it to seamlessly blend into various home decors. The window remains large and unobstructed, providing a clear view of the fire and enhancing the ambiance of any room.

Additionally, Harman’s renowned build quality ensures that the P43 is not only functional but also durable. Constructed from high-quality materials, the stove is designed to offer long-lasting performance. The unit's efficient fuel feeding system minimizes the need for constant refueling, further enhancing its usability.

Overall, the Harman Stove Company P43 represents a perfect fusion of technology, efficiency, and design. Its strong performance, user-friendly interface, and aesthetic appeal make it a leading choice for those who prioritize comfort and sustainability in their home heating solutions.
Top Page Image Contents