Maintenance
Although this monitor requires little care, you can still maintain its condition and performance by following these steps:
•Keep the system away from excessive moisture, extreme heat or cold, and magnetic fields.
•Occasionally clean the monitor screen with damp soft cloth.
Should you experience any problem with the system please refer to the troubleshooting guide prior to returning your system for repair.
Note 1: The user should not attempt to service the unit beyond that described in the operating instructions. All other servicing should be referred to qualified personnel.
Note 2: Do not expose the unit to water or excessive moisture. This could cause electrical shorts, fire or other damage.
Troubleshooting
Only qualified personnel should remove the cover or service this unit. The warranty will become invalid if factory security seal is broken.
Symptoms | Solutions |
|
|
Unstable Image | • |
| • Check Generator |
| • If the systems is wireless move vehicle to |
| another location, as the problem may be |
| caused by outside interference. |
|
|
Cloudy Image | • Clean Dirty Camera Lens |
| • Clean Dirty Monitor Lens |
| • Adjust Contrast |
| • Adjust Brightness |
|
|
No Power/Picture | • Check Fuses |
| • Check if AV Cable is Properly Connected |
| to Monitor |
No Sound | • Check Volume Level and Audio |
| Connection |
| Note: The speaker is only operational when |
| the vehicle is put into reverse and is auto- |
| matically activated. |
|
|
No Color | • Check Color Level Settings |
|
|
Upside Down or Inverted Image | • Check Horizontal and Vertical Settings |
|
|
Monitor Does Not Display Image When | • Check the Green Reverse Trigger Wire for |
Vehicle is in Reverse | Proper 12 Volt Connection. |
| • Check Video Inputs to Ensure they are |
| Properly Connected |
|
|
|
|
11
