FUNAI EWR10D5 Others, Troubleshooting, Symptom, Remedy, Power, Picture, Sound, Remote control

Others

Troubleshooting

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.

Symptom	Remedy
Power

The power does not turn on.

•Check that the AC power cord is connected securely.

•(In case of power failure) Check the breaker.

Picture

There is no picture.	• Re-connect the connecting cord securely.
	• The connecting cords are damaged.
	• The Setup Display appears. Hit [RETURN	] to turn off the
	display.
	• Check the connection to your TV (page 13).
	• Switch the input selector on your TV (such as to “LINE1”) so
	that the signal from this unit appears on the TV screen.
Picture noise appears.	• The disc is dirty or flawed.
	• If the picture output signal from the unit passes through your
	VCR before reaching your TV, or if you are connected to a
	combination TV/VIDEO player, the copy-protection signal
	applied to some DVD programs could affect picture quality. If
	you still experience this problem even when you connect the
	unit directly to your TV, try connecting the unit to your TV's S-
	VIDEO input.
TV program reception does not fill the	• Try to set the channels with “Auto Preset” in the Setting menu (page 18).
screen.	• Select a channel of any TV program using [CH o / p].
TV program pictures are distorted.	• Adjust TV antenna.
	• Adjust the picture (see the TV’s instruction manual).
	• Place the unit and TV farther apart.
	• Place the TV and any bunched antenna cables farther apart.

TV channels cannot be changed.

•Switch the input to TV.

•Connect the antenna cable correctly (page 13).

Playback picture is distorted	• Keep the equipment which may cause electrical disturbances,
	such as a cellular phone, away.

The playback picture or TV program from the equipment connected through the unit is distorted.

•If the playback picture output from a DVD player,VCR or tuner goes through the unit before reaching your TV, the copy- protection signal applied to some programs could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV.

Sound

There is no sound.

•The disc is dirty or flawed.

•Re-connect all connections securely.

•The connecting cord is damaged.

•Check the connections to the amplifier input.

•The input source setting on the amplifier is incorrect.

•The recorder is in pause mode or in Slow-motion Play mode.

•The recorder is in fast forward or fast reverse mode.

•If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the Audio settings (pages 68-70).

Sound is noisy.	• The disc is dirty or flawed.
No DTS sound is output.	• This unit is not compatible with DTS sound.
Remote control

The remote control does not function.

•Batteries are weak.

•There are obstacles between the remote control and the unit.

•The remote control is far from the unit.

•There are no batteries in the remote control.

•Turn on the unit.

•The remote control is not pointed at the remote sensor on the unit.

•If above remedies do not solve the problem, please call the Service Center for help.

72