FUNAI EWR10D5 Owner’s Manual, DVD Recorder, Please read before using this equipment, RF modulator

Owner’s Manual	EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
	OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
DVD Recorder
	EWR10D5
	OPEN/CLOSE CHREV FWD STOP PLAY POWER
	REC SPEED REC/OTR
	S-VIDEO VIDEO L AUDIO R

INSTRUCCIONES EN ESPAÑOL INCLUIDAS

Please read before using this equipment.

If you need additional operating assistance after reading this owner’s manual or to

order replacement accessories, please call

TOLL FREE : 1-800-605-8453

or visit our web site at http://www.EmersonAudioVideo.com

Connection to a TV

(Before you use this unit, you need to complete connections.)

If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to con- nect this unit to your TV by using a STEREO AUDIO/VIDEO RF Modulator (commercially available.) In this case, follow the instructions below.

1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to the ANTENNA IN jack of this unit.

2)Connect the ANTENNA OUT jack of this unit to your RF Modulator (usually marked “ANT IN”) by the RF cable.

3)Connect your RF modulator to your TV by another RF cable.

4)Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF Modulator by audio and video cables.

5)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.

6)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.

For more details, follow the instructions supplied with the RF Modulator.

Before you start Connections Getting started Recording Playing discs Editing

Cable Antenna TV signal

(Back of This Unit)				4
VIDEO IN	COMPONENT
	VIDEO OUTPUT		VIDEO OUT
IN	S-VIDEO	Y

OUT	IN	OUT	Audio/Video cables
	L	L
		PB/CB	(supplied)
	R	R
	AUDIO IN	PR/CR
	(L1)	AUDIO OUT

6

Turn on your TV and select channel 3 or 4.

Changing the Setting

1

2	5
RF cable	Set channel 3 or 4.
(supplied)

AC 120V ANT IN CHANNEL		TO TV	AUDIO IN VIDEO IN
3	4		R	L

Stereo Audio/Video
RF modulator	3 RF cable
(commercially available)

Antenna in jack

(Back of TV)

Note

•The quality of picture may become poor if this unit is connected to an RF Modulator.

menu Others

To record a program easily, refer to “Easy DVD recording” on pages 16-17 after connections are completed.

(You CANNOT record on any copyright protected DVD disc with this unit.)

Español