Monitor Features and Controls
1 2 3 4 5 6
1.LCD Screen
2.IR Sensor: Receives signal from the remote control.
3.LED Power Indicator:
A red LED indicates the vehicle’s ignition is “On” and the monitor is in the “stand- by” mode. When the vehicle is put into reverse or the turn signals are used the camera’s image will automatically appear on the display. Note: The cameras can not be manually selected in this mode.
A green LED indicates the power button on the monitor has been pressed and the ignition is “On”. The camera’s images can manually be selected to appear by using the SEL button. The video in jack is also operational.
LED is off: The monitor has no function.
4.Power Button: Press this button to turn the unit "On" or "Off".
Note: The ignition key must be in the “On” position.
5.Brightness Button (Decrease): Press this button to decrease the screen’s brightness.
Note: When the menu is displayed press this button to adjust the selected menu item.
7 | 8 | 9 | 10 | 11 |
6.Brightness Button (Increase): Press this button to increase the screen’s brightness. Note: When the menu is displayed, press this button to adjust the selected menu item.
7.CH- Button (Menu Item Selection): Press this button to select a menu item when a menu is displayed.
8.Menu Button: Press this button to select a desired menu screen.
9.SEL: Press this button to select a video sources (CAM1, CAM2, CAM3 and DVD).
Note 1: When the left turn signal is acti- vated CAM1 (left side view camera) is selected automatically.
Note 2: When the right turn signal is activated CAM2 (right side view camera) is selected automatically.
Note 3: When the vehicle is put into reverse CAM3 (rearview camera) is selected automatically.
10.Video Input Jack
11.Speaker: The speaker is automatically activated only when the vehicle is put into reverse.
Note: The rear camera must have a built- in microphone for proper operation.
3
