| SF2600 Burner Set Up |
|
|
SF2600 Oil Burner Setup |
|
Nozzle | 80 Degree Solid Cone |
Off Cycle Damper Setting (B) | No.1 (as low as it goes |
Flamelock Setting (A) | No. 1 |
Combustion Air (C) | No. 1 to 1¼ |
Draft - (Inches of water column) | .06 to .08 |
Tests for CO² must be made without a fire in the wood/ coal firebox, and with all doors and draft controls completely closed. The burner should be fired for several minutes prior to taking a reading. Normal CO² reading is 11 to 12 with a stack temperature of 300 degrees or less. This would give you an efficiency of 84 to 85 percent.
7¾” 
12½”
7”
12⅞”
18
