Manuals / Brands / Personal Care / Personal Lift / Harrington Hoists / Personal Care / Personal Lift

Harrington Hoists ER2, NER2 NOTICE, WARNING, WARNING, Figure, Section, 3.3Mounting Location, 3.4Mounting the Hoist, (N)ER2080S to (N)ER2100L, (N)ER2100S to (N)ER2200L

1 22

Download 22 pages, 1.53 Mb

3.3.1 WARNING

3.2.6 WARNING

(N)ER2080S to (N)ER2100L	(N)ER2100S to (N)ER2200L

Figure 3-3Installation of Chain Container

3.2.5When using an optional steel chain container, refer to the instructions and/or assembly drawing(s) provided with the container for correct assembly and attachment.

Verify that the load chain is not twisted or tangled prior to operating the hoist. Make sure the bottom hook is not capsized. See Figure 3-4.Correct all chain irregularities before conducting the first hoist operation.

3.2.7Lubricate the entire length of the load chain with the supplied tube(s) of grease per the instructions in Section 6.2.1.

Figure 3-4Capsized Hook and Chain3.3Mounting Location

Prior to mounting the hoist ensure that the suspension and the supporting structure are adequate to support the hoist and its loads. If necessary consult a professional that is qualified to evaluate the adequacy of the suspension location and its supporting structure.

3.3.2	NOTICE	See Section 6.8 of the ER2OM for outdoor installation considerations.

3.4Mounting the Hoist

3.4.1Manual Trolley - Follow instructions in Owner’s Manual provided with the trolley.

3.4.2Motorized Trolley - Follow instructions in Owner’s Manual provided with the trolley.

3.4.3Hook Mounted to a Fixed Location - Attach the hoist’s top hook to the fixed suspension point.

9

Contents

Page IMPORTANT INFORMATION ON HOW TO USE THIS MANUAL Table of Contents 1.0Important Information and Warnings…...………………...………………………………………. ER2OM Terms and Summary Warning Tags and Labels 5.0Inspection…………………………….………………………………….…………..…….. 15 and ER2OM General Inspection Classification Frequent Inspection Periodic Inspection 2.0 Technical Information Table 2-1 Hoist Specifications Rated Current (mm) 2.2Dimensions Table 2-2 Hoist Dimensions Figure 2-1 – NER2080S Figure 2-3 – NER2100S Figure 2-4 – NER2100SD Table 2-3 Hook Dimensions 3.0 Preoperational Procedures 3.2Chain Figure 3-2 Chain Component Arrangement Table 3-2 Chain Stopper Placement Without Chain Container With Chain Container WARNING NOTICE 3.4Mounting the Hoist Pendant Cord operation DANGER CAUTION Do NOT apply electronic soft-start Page Page Page Page 5.0 Inspection Table 5-4 Top Hook & Bottom Hook Dimensions Table 5-5 Chain Wear Dimensions Table 5-6 Chain Spring Length Dimensions 080S, 100L, 100S, 0150S, 200S 6.0 Maintenance and Handling 6.4Load Chain 6.4.1Lubrication and Cleaning – refer to Section 6.2 of ER2OM 6.4.2Load Chain Replacement for ER2080S and ER2100L: following procedures Chain Guides and Idle Sheaves, and replace parts if necessary Figure 6-3 Chain Replacement for 080S and 100L 6.4.3Load Chain Replacement for ER2100S, ER2150S and ER2200S: Install the Stopper and Chain Spring to the free end of the new chain. Refer to 10)Remove the open link attaching the new chain to the old chain WARNING 3.2 in this supplement Figure 6-4 Chain Replacement for 100S, 150S, 200S www.harringtonhoists.com