Havis-Shields C-PED Series manual Tools Required, Hardware, Description, Part #, Always

INSTALL INSTRUCTIONS C-PED SERIES

(C-PED1612-W2 or C-PED1612-W4)

SILVER BILLET™ TELESCOPING COMPUTER MOUNTS

C-PED1612-W2 Silver Billet Telescoping Computer Pedestal with 2” Offset Bracket C-PED1612-W4 Silver Billet Telescoping Computer Pedestal with 4” Offset Bracket

TOOLS REQUIRED:
Ratcheting wrench		Drill bit set
Socket set		Screwdriver set
Powered drill		Standard Allen key set
HARDWARE:
QTY	DESCRIPTION	PART #
1	White Teflon washer	CM93081
7	¼-20 x ¾” Phillips machine screw	GSM33124
3	¼-20 Thin Nylock nut	GSM30016-1
7	¼” Flat washer	GSM31005
4	¼” Lock washer	GSM31026
4	5/16” x 1” Hex head lag bolt	GSM34203

Always!

Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit