Havis-Shields manual Install Instructions C-TCB-MAK, Always, Tools Required

INSTALL INSTRUCTIONS C-TCB-MAK

MONITOR ADAPTER KIT

FOR USE ON ALL STRAIGHT POLED C-TCB’S

TOOLS REQUIRED:
Ratcheting wrench		T-20 torx bit
Sockets - 7/16”, ½”		3/16” Allen key
Combination wrenches - 7/16”, ½”
HARDWARE:
ITEM #	QTY	DESCRIPTION	PART #
1	1	Rotating TCB plate	CM93073-2
2	1	Bolt/nut weldment	CM001491
3	1	5/16-24 Flex nut	CM86209
4	1	5/16-24 x 1” Socket head cap screw	CM86502
5	2	5/16” Belleville stainless washer	GSM31092
6	2	5/16” x 2” Fender washer	GSM31020
7	1	5/16-24 Hex jam nut	GSM30070
8	1	5/16-18 nylock nut	GSM30017

Always!

Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit

#5, 8

#2

Straight inner pole assembly

#1

#3, 4, 5, 6, 7