
Caution: The Dome Light uses bulbs which can be VERY HOT! Do not touch a bare bulb when it is lighted.
2.Operation:
•The fixture has two switches, which control each of the two lamps independently.
•Pressing each switch once turns the lamp on, and pressing it a second time turns the lamp off.
3.Troubleshooting:
•In the event of improper operation, first check that the switches are turned on.
•Second, check the each bulb and replace if burned out.
•Third, check the fuse (if installed) and replace if necessary.
•Finally, use a voltmeter to ensure that the fixture is receiving adequate power. The light requires nominally 12 VDC for correct operation. Voltage must be measured using the fixture power leads, not the vehicle chassis. Correct any faults found.
REPLACEMENT PARTS: |
|
Part # | Description |
Automotive Type 918 Replacement Lamp, 7 Watt, 12 VDC |
Clip Here | Clip Here |
TEMPLATE: | ∅0.17 (11/64” Drill) |
Wireway | Mounting Holes |