Linux ACP Modem (Mwave) mini−HOWTO
during the build process.
2. Setup the serial driver to recognize the UART provided by the ACP driver.
setserial /dev/ttyS0 autoconfig
NOTE
Substitute /dev/ttyS0 to match the serial port you have configured the DSP to use.
NOTE
You may wish to create a symbolic link from your modem device to your serial device for convenience. Example: ln −s /dev/ttyS0
/dev/modem
The ACP Modem is now available for use by your favorite dialing application.
2.4.2. Running ACP Modem Application | 6 |
