Delivery Checklist

Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer.

1.Engine Handbook. 2. Grassbag.

3.Owners Handbook

To prevent accidents cut off the long ribbon attached to the grass- bag and discard.

Handlebar

Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Hold the engine stop lever in towards the handlebar and unfold the handlebar to the operating position, before releasing. Tighten both handlebar knobs to secure in position.

Take care to ensure that the control cables do not become snagged at the pivot point.

Adjust Height of Handlebars

Using a suitable spanner or socket. Loosen the 2 fixings at the base of the handlebars. Unscrew the 2 lower knobs sufficiently to allow han- dlebars to pivot. Set the required position and re-tighten the 2 lower knobs, check position and re-tighten the fixing screws at the base of the handlebar.

Grassbag Attachment

HAYTER

Raise the rear deflector, lower the grassbag through the handlebar and hook in position. Lower the deflector to rest on the grassbag

1.12