Slopes
To prevent engine damage do not use the mower on slopes greater than 20 degrees.
Height of Cut
Grip the lever and pull sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Finally release the lever at the required position and ensure it locks firmly into one of the nine notch settings.
| Always select a height of cut to suit operating conditions. Aim to pre- |
| vent engine overloading and blockages by avoiding low cuts in long |
305113 | grass conditions. Be prepared to make two cuts when the grass is long. |
Before Mowing
To prevent accidents thoroughly inspect the area and remove all objects which when contacted by the mower cutterblade could become dangerous projectiles. Inspect the area for hidden obstructions which when contacted by the cutterblade could risk health and safety. Remember the location of these obstructions and ensure that you mow around them.
Grassbag
Raise the rear deflector and lift the grassbag through the handlebar and lower the rear deflector to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the grassbag vigorously to clean the airways. Good grass collection depends on good air flow through the grassbag. When collecting grass clippings it is important that the grassbag is emptied regularly to prevent blockages and engine overloading.
1.16