OPERATOR SAFETY
OWNER’S INFORMATION
Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manu- al, compare the illustrations to the unit. Learn the location and the function of the controls. It is important that you read and understand these original instructions thoroughly before attempting to start or operate this equipment.
WARNING: Look for this symbol to indi- cate important safety precautions. This symbol indicates: “Attention! Become Alert! Your Safety Is At Risk.”
Responsibility Of The Owner
WARNING: This cutting machine is capable of throwing objects. Failure to observe the following
safety instructions could result in serious injury to the operator or bystanders.
The responsibility of the owner is to follow the instructions below.
SAFETY PRECAUTIONS
I.General Operation
1.Read, understand, and follow all instruc- tions on the machine and in the manu- al(s). Be thoroughly familiar with the controls and the proper use of the ma- chine before starting.
2.Familiarize yourself with all of the safety and operating decals on this equipment and on any of its attachments or acces- sories.
3.Do not put hands or feet near or under rotating parts.
4.Only allow responsible individuals, who are familiar with the instructions, to oper- ate the machine.
5.Thoroughly inspect the area where the machine is to be used and remove all foreign objects. Your equipment can propel small objects at high speed caus- ing personal injury or property damage. Stay away from breakable objects, such as house windows, automobiles, green- houses, etc.
6.Keep the area of operation clear of all persons, particularly small children, and pets.
7.Wear appropriate clothing such as a long−sleeved shirt or jacket. Also wear long trousers. Do not wear shorts.
8.Do not wear loose clothing or jewelry. They can be caught in moving parts.
9.Always wear safety goggles or safety glasses with side shields when operating the machine to protect your eyes from foreign objects which can be thrown from the unit.
10.Always wear work gloves and sturdy footwear. Wear footwear that will im- prove footing on slippery surfaces. Do not operate product when barefoot or wearing open sandals. Leather work shoes or short boots work well for most people. These will protect the operator’s ankles and shins from small sticks, splin- ters, and other debris.
11.It is advisable to wear protective head- gear to prevent the possibility of being struck by small flying particles, or being struck by low hanging branches, twigs, or other objects which may be unnoticed by the operator.
12.Do not operate the machine without proper guards or other safety protective devices in place.
13.Use this equipment for its intended pur- pose only.
14.See manufacturer’s instructions for prop- er operation and installation of accesso- ries. Only use accessories approved by the manufacturer.
15.Operate only in daylight or good artificial light.
16.Do not operate product when fatigued or under the influence of alcohol, drugs or other medication which can cause drowsiness or affect your ability to oper- ate this machine safely.
17.Never operate machine in wet grass. Al- ways be sure of your footing; keep a firm hold on the handle and walk; never run.
18.Before each use, inspect the throttle control lever and cable. Make sure that the cable is free and that the lever is not damaged. Also check the cable linkage running to the carburetor for kinks, loose fittings, and obstructions. Verify that the control bail is working properly.
19.Stop the rotating trimmer head when crossing gravel drives, walks, or roads. Wait for the cutting lines to stop rotating.
20.Watch for traffic when operating near, or when crossing roads.
1739579 | 4 |
