MOWER MAINTENANCE

Cutterblade Sharpening

A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more frequently if conditions require. Remove the cutterblade from the mower and clean using a brush and water. In- spect the cutterblade for signs of damage.

Sharpen both cutting edges with a flat file to restore per- formance. (Refer fig.35)

Ensure that the cutterblade is balanced. Use a screw driv- er with a round shaft to support the cutterblade through its centre hole. Hold the cutterblade horizontal and then release. A balanced cutterblade will remain horizontal.

(Refer fig.36)

If the cutterblade is not balanced the heavy end will rotate downwards. Sharpen the heavy end until the cutterblade is correctly balanced. (Refer fig.37)

Storage

To store the handlebar unscrew the 2 small securing knobs sufficiently to allow it to be pivoted forwards to rest against the mower. Take care to ensure that the con- trol cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being damaged through contact with the engine. (Refer fig.38)

Engines stored in excess of 30 days need to be protected

with Briggs & Stratton fuel additive or drained of fuel to prevent gum from forming in the fuel system or on essen- tial carburettor parts. To ensure your mower is maintained in good working order it is important that the following procedure is adopted. Refer to the Maintenance section as necessary.

-Drain fuel from the engine by operating the engine until it stops.

-Disconnect the spark plug lead.

-Change the engine oil.

-Remove the engine spark plug and pour 15ml of engine oil into the engine cylinder and replace the spark plug. Do not exceed the stated volume of oil as engine damage may occur on re-starting. Do not replace the spark plug lead. Slowly pull the engine start - grip once to crank the engine. This will distribute the oil and help prevent engine corrosion.

-Clean grass and debris from the engine cylinder, cylinder head cooling fins, under top cowl, around and behind ex- haust/exhaust guard and ensure that the grassbag is clean.

-Lubricate the mower and treat metal parts with a water repellent anti-corrosion product.

-Cover the mower with a protective sheet and store it in a dry, ventilated area.

Fig. 35

Fig. 36

Fig. 37

Fig. 38

 

30-45

 

 

13

Page 12 Page 14
Page 13
Image 13
Hayter Mowers 566G, 496G manual Cutterblade Sharpening, Storage
Page 12 Page 14

566G, 496G specifications

Hayter Mowers has gained a reputation for delivering innovative and efficient lawn care solutions, and their 496G and 566G models exemplify this dedication to excellence. Designed for professional landscapers and discerning homeowners alike, these mowers offer a combination of power, adaptability, and user-friendly features that set them apart in the market.

The Hayter 496G is particularly notable for its robust construction and reliability. It features a strong 60 cm cutting width, allowing users to cover large areas efficiently. The mower is equipped with a powerful Honda engine, renowned for its performance and durability. This ensures that the 496G can tackle various grass types and conditions, making it suitable for both residential lawns and commercial landscapes.

On the other hand, the 566G model takes cutting performance to another level with its advanced features. With an impressive 66 cm cutting width, it caters to larger areas while still providing exceptional maneuverability. The mower is designed with a high-capacity grass collector, which allows for effective grass collection, minimizing the need for additional cleanup after mowing. The robust design ensures that even in tougher conditions, the 566G maintains a consistent and clean cut.

Both models include Hayter’s signature vari-speed drive system, which allows users to adjust the speed to their preferred walking pace. This enhances comfort and control during operation, whether navigating tight spaces or open fields. Additionally, the ergonomic design of the handles provides comfort during extended use, reducing fatigue for the operator.

Hayter has integrated innovative technologies into these mowers, including a unique cut and collect system that helps reduce lawn clippings left on the surface, promoting healthier grass growth. These models are also equipped with durable, high-quality blades that ensure precision cutting and longevity.

Another key feature of both the 496G and 566G is their easy maintenance design, which is essential for operators who need to keep their equipment in top condition. Access to the engine and other components is straightforward, making routine checks and servicing convenient.

In summary, the Hayter Mowers 496G and 566G represent the pinnacle of engineering and design in the lawn care industry. With their powerful engines, efficient cutting systems, and user-friendly features, these mowers are a perfect choice for anyone looking to achieve a pristine lawn with minimal effort. Whether for residential or professional use, Hayter continues to lead the way in dependable and high-performance lawn care solutions.
Top Page Image Contents