Height Of Cut, Before Mowing, Heavy Growth

OPERATING THE MOWER

Height Of Cut

To adjust the height of cut: Grip the lever and pull side- ways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Finally release the lever at the required position and ensure it locks firmly into one of the eight setting notches.

Always select a height of cut to suit operating conditions. Aim to prevent engine overloading and blockages by avoiding low cuts in long grass conditions. Be prepared to make two cuts when the grass is long. (Refer fig.14)

Before Mowing

To prevent accidents, thoroughly inspect the area and remove all objects which when contacted by the mower cutterblade could become dangerous projec- tiles. Inspect the area for hidden obstructions which when contacted by the cutterblade could risk health and safety or result in damage to the mower. Remem- ber the location of these obstructions and ensure that you mow around them. (Refer fig.15)

shake the grassbag vigorously to clean the airways. Good grass collection depends on good air flow through the grassbag. When collecting grass clippings it is important that the grassbag is emptied regularly to prevent block- ages and engine overloading. (Refer fig.16)

Without Grass Collection

Remove the grassbag and operate the mower with the

rear deflector in the closed position. (Refer fig.17)

Heavy Growth

Areas of heavy growth should be mown without collecting the clippings. If collection is required, first mow the area without the grassbag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted. Reduce the height of cut and mow the area again as necessary until the required finish is obtained.

To prevent damage to your lawn do not remove more than one third of grass height in one cut. (Refer fig.18)

Non Grassed Areas

When moving the mower across non-grassed areas, stop the engine and set the mower to the maximum height of cut to protect the cutting mechanism. (Refer fig.19 & 20)

Grassbag

Raise the rear deflector and lift the grassbag and lower the rear deflector to rest against the rear of the mower.

To empty the grassbag, pour out the grass clippings and

Friction Disc

The cutterblade is driven by the engine via a friction disc to help prevent damage occurring to the engine crankshaft and cutting mechanism when a hidden obstruction or overload is encountered. (Refer fig.19)

Fig. 14

Fig. 15

Fig. 16

Fig. 17

Fig. 18

Fig. 19

Fig. 20

566G, 496G specifications

Hayter Mowers has gained a reputation for delivering innovative and efficient lawn care solutions, and their 496G and 566G models exemplify this dedication to excellence. Designed for professional landscapers and discerning homeowners alike, these mowers offer a combination of power, adaptability, and user-friendly features that set them apart in the market.

The Hayter 496G is particularly notable for its robust construction and reliability. It features a strong 60 cm cutting width, allowing users to cover large areas efficiently. The mower is equipped with a powerful Honda engine, renowned for its performance and durability. This ensures that the 496G can tackle various grass types and conditions, making it suitable for both residential lawns and commercial landscapes.

On the other hand, the 566G model takes cutting performance to another level with its advanced features. With an impressive 66 cm cutting width, it caters to larger areas while still providing exceptional maneuverability. The mower is designed with a high-capacity grass collector, which allows for effective grass collection, minimizing the need for additional cleanup after mowing. The robust design ensures that even in tougher conditions, the 566G maintains a consistent and clean cut.

Both models include Hayter’s signature vari-speed drive system, which allows users to adjust the speed to their preferred walking pace. This enhances comfort and control during operation, whether navigating tight spaces or open fields. Additionally, the ergonomic design of the handles provides comfort during extended use, reducing fatigue for the operator.

Hayter has integrated innovative technologies into these mowers, including a unique cut and collect system that helps reduce lawn clippings left on the surface, promoting healthier grass growth. These models are also equipped with durable, high-quality blades that ensure precision cutting and longevity.

Another key feature of both the 496G and 566G is their easy maintenance design, which is essential for operators who need to keep their equipment in top condition. Access to the engine and other components is straightforward, making routine checks and servicing convenient.

In summary, the Hayter Mowers 496G and 566G represent the pinnacle of engineering and design in the lawn care industry. With their powerful engines, efficient cutting systems, and user-friendly features, these mowers are a perfect choice for anyone looking to achieve a pristine lawn with minimal effort. Whether for residential or professional use, Hayter continues to lead the way in dependable and high-performance lawn care solutions.

Hayter Mowers 566G Height Of Cut, Before Mowing, Without Grass Collection, Heavy Growth, Grassbag

Models: 566G 496G