OPERATION | WARNING: Always keep your | |
| hands and feet away from the | |
NOTE: Illustrations and pictorials begin on | blade, deflector opening, and the | |
mower housing when the engine runs. | ||
page 2. | ||
|
GB
WARNING: Make sure the parking brake will hold the unit.
5. | Move the throttle control (7) to the SLOW |
| position. |
6. | To stop the engine, turn the ignition key (3) |
Location Of Controls (Figure 13)
Blade Rotation Control (1): Use the blade rotation control to start and stop the rotation of the blade.
Clutch / Brake Pedal (2): The pedal has two functions. The first function is a clutch. The second function is a brake.
Headlight Switch (3): The headlight switch is the first part of the ignition switch. To use the lights with the engine running, turn the key to the position for the lights.
Ignition Switch (3): Use the ignition switch to start and stop the engine.
Shift Lever (4): Use the shift lever to change the speed of the unit.
Lift Lever (5): Use the lift lever to change the height of cut.
Parking Brake Lever (6): Use the parking brake lever to engage the brake when you leave the unit.
Throttle Control Lever (7): Use the throttle control lever to increase or decrease the speed of the engine.
How To Use The Throttle Control (Figure 13)
Use the throttle control (7) to increase or decrease the speed of the engine.
1.The FAST position is marked with a detent. For normal operation and when using a grass bagger, move the throttle control to the FAST position. For maximum charging of the battery and for a cooler running engine, oper- ate the engine in the FAST position.
2.The engine governor is set at the factory for maximum performance. Do not adjust the governor to increase the speed of the en- gine.
How To Use The Shift Lever (Figure 13)
To change the forward speed or the direction of the unit, follow the steps below.
CAUTION: Before you move the shift lever, completely push the clutch/brake pedal for- ward to stop the unit. If the unit is not stopped, the gearbox can be damaged.
1.Completely push the clutch/brake pedal (2) forward to stop the unit. Keep your foot on the pedal.
2.Move the throttle control lever (7) to the SLOW position.
3.To go forward, move the shift lever (4) to a forward speed setting. To go backward, move the shift lever (4) to reverse.
4.Slowly release the clutch/brake pedal (2). Do not keep your foot on the pedal.
5.Move the throttle control (7) to the FAST position.
How To Use The Parking Brake (Figure 13)
1.Completely push the clutch/brake pedal (2) forward.
2.Lift the parking brake lever (6).
3.Remove your foot from the clutch/brake pedal (2) and then release the parking brake lever (6). Make sure the parking brake will hold the unit.
4.To release the parking brake (6), completely push the clutch/brake pedal (2) forward. The parking brake will automatically release.
WARNING: Before you leave the operator’s position, move the shift lever to the neutral (N) position. Set
the parking brake. Move the blade rotation control to the DISENGAGE position. Stop the engine and remove the ignition key.
to the OFF position. Remove the key. |
How To Transport The Unit
To transport the unit, follow the steps below.
1.Move the blade rotation control to the DIS- ENGAGE position.
2.Raise the lift lever to the highest position.
3.Move the throttle control to a position be- tween SLOW and FAST.
4.To go faster, move the shift lever to a faster speed.
How To Operate With The Mower Housing
IMPORTANT: When you operate with the mower housing, always operate with the throttle control in the FAST position.
1. | Start the engine. |
2. | Move the lift lever to a height of cut position. |
| In high or thick grass, cut the grass in the |
| highest position first and then lower the |
| mower housing to a lower position. |
3. | Move the throttle control to the SLOW posi- |
| tion. |
4. | Slowly move the blade rotation control to the |
| ENGAGE position. |
5. | Push the clutch/brake pedal completely for- |
| ward. |
6. | Move the shift lever to one of the speed set- |
| tings. |
| NOTE: When you mow in heavy grass or |
| mow with a bagger, put the shift lever in |
| the slowest speed. |
7. | Slowly release the clutch/brake pedal. |
8. | Move the throttle control to the FAST posi- |
| tion. If you need to go faster or slower, stop |
| the unit and move the shift lever to another |
| speed setting. |
9. | Make sure the level of cut is still correct. |
| After you mow a short distance, look at the |
| area that was cut. If the mower housing does |
How To Use The Blade Rotation Control (Figure 13)
Use the blade rotation control (1) to engage the blade(s).
1.Before you start the engine, make sure the blade rotation control (1) is in the DISEN- GAGE position.
2.Move the blade rotation control (1) to the ENGAGE position to rotate the blade(s).
NOTE: If the engine stops when you en- gage the blade(s), the seat switch or the grass bag switch is not activated.
3.Move the blade rotation control (1) to the DISENGAGE position to stop the blade(s). Before you leave the operator’s position, make sure the blade(s) has stopped rotating.
4.Before you ride the unit across a sidewalk or a road, move the blade rotation control (1) to the DISENGAGE position.
How To Change The Cutting Height (Figure 13)
To change the cutting height, raise or lower the lift lever (5) as follows.
1.Move the lift lever (5) forward to lower the mower housing and back to raise the mower housing.
2.When you ride on a sidewalk or road, move the lift lever (5) to the highest position and move the blade rotation control to the DIS- ENGAGE position.
How To Stop The Unit (Figure 13)
1.Completely push the clutch/brake pedal (2) forward to stop the unit. Keep your foot on the pedal.
2.Move the blade rotation control (1) to the DISENGAGE position.
3.Move the shift lever (4) to the NEUTRAL position.
4.Set the parking brake (6).
14
not cut level, see the instructions on “How To |
Level The Mower Housing” in the Mainten- |
ance section. |
WARNING: For better control of the unit, select a safe speed.
How To Operate On Hills
WARNING: Do not ride up or down slopes that are too steep to back straight up. Never ride the unit
across a slope.
1.Before you ride up or down a hill, move the shift lever to the slowest speed.
2.Do not stop or change speed settings on a hill. If you must stop, quickly push the clutch/ brake pedal forward and set the parking brake.
3.To start again, make sure the shift lever is in the slowest speed. Move the throttle control to the SLOW position. Slowly release the pedal.
