4.Remove the two Frame Guide Screws (9) from the left side of the Frame (5).
Attach the Frame Guide (10) and the Frame Guide Spacer (11) to the Frame (5) with the two Frame Guide Screws (9) as shown. Note: Be careful not to over- tighten the Screws. Make sure that the thick end of the Frame Guide is at the bottom.
4 |
10 |
9 |
11 |
5 |
Thick End |
5.Remove the backing from the Wrench Clip (26). Press the Wrench Clip onto the base of the Uprights (84) in the indicated location. Press the Allen Wrench (29) into the Wrench Clip.
5 |
84 |
26 |
29 |
6.Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. Read and familiarize yourself with the
6
