CONSOLE OPERATION

 

 

Water Bottle Holder

Reading Rack

Displays

Incline Buttons

Start/Pause Button

Speed Buttons

Accessory Tray

Key

 

 

 

 

 

Clip

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Follow the steps below to operate the console.

CAUTION: Before operating the

 

 

 

 

Insert the key into the console.

console, read the following precautions.

 

 

1

 

 

 

 

 

 

 

 

 

 

¥ Do not stand on the walking belt when turn-

 

 

 

When the key is inserted, the four displays will

ing on the power or starting the walking belt.

 

 

 

turn on.

¥ Always wear the clip (see the drawing above)

 

 

 

Press the start/pause button.

 

2

while operating the treadmill. If the key is

 

 

 

 

 

 

 

pulled from the console, the walking belt will

 

 

 

A moment after the button is pressed, the walking

stop.

 

 

 

 

 

belt will begin to move at 1 mile per hour. Hold the

¥ The treadmill is capable of high speeds;

 

 

 

handrails and begin walking. Note: The walking

 

 

 

belt can also be started by pressing the speed ▲

adjust the speed in small increments.

 

 

 

 

 

 

 

 

 

 

button once.

 

 

 

 

 

 

¥ To reduce the risk of electric shock, keep the

 

 

 

Adjust the speed of the walking belt with the

 

3

console dry. Avoid spilling liquid on the

 

 

speed buttons.

console and use only a sealable water bottle.

 

 

 

As you walk on the tread-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mill, adjust the speed of

 

 

STEP BY STEP CONSOLE OPERATION

 

 

 

 

 

the walking belt with the

 

 

 

 

 

 

 

speed buttons. Each time

 

 

 

 

 

 

 

 

 

 

If there is a thin sheet of clear plastic on the console,

 

 

one of the buttons is

 

 

 

 

 

 

 

 

pressed, the speed will

remove it. In addition, make sure that the power cord is

 

 

 

 

change by 0.1 mile per hour. The buttons can be

properly plugged in (see HOW TO PLUG IN THE

 

 

POWER CORD on page 7).

 

 

 

 

 

held down to change the speed quickly. The

 

 

 

 

 

 

speed range is 0.5 to 10 miles per hour. Note:

Next, step onto the foot rails of the treadmill. Find the

 

 

After the buttons are pressed, it may take a

clip attached to the key (see the drawing above), and

 

 

moment for the walking belt to reach the selected

slide the clip onto the waistband of your clothing.

 

 

speed setting.

8

Page 8
Image 8
Healthrider 831.297830 manual Step by Step Console Operation