HOW TO LOWER THE TREADMILL FOR USE

1.Hold the upper end of the treadmill with your right hand as shown. Using your left hand, push the storage latch to the left. Pivot the treadmill until the storage latch is past the catch. Note: You may need to push on the treadmill with your right hand when unlatching the treadmill.

2.Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of in- jury, bend your legs and keep your back straight.

Storage

Latch

Catch

TROUBLE-SHOOTING AND MAINTENANCE

Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-888-936-4266, Monday through Friday, 8 a.m. until 6:30 p.m. Eastern Standard Time (excluding holidays).

PROBLEM

SOLUTION

 

 

1. The power does

a. Make sure that the power cord is plugged into a surge protector, and that the

not turn on

surge protector is plugged into a properly grounded outlet. (See page 7.) Use only

 

a CUL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet

 

or less in length.

b.Make sure that the key is fully inserted into the console.

c.Check the circuit breaker located on the frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d.Check the on/off switch located on the frame near the power cord. The switch must be in the on position.

Tripped Reset

On

Position

15

Page 15
Image 15
Healthrider HCTL06190 TROUBLE-SHOOTING and Maintenance, HOW to Lower the Treadmill for USE, Problem Solution, Power does