![](/images/new-backgrounds/1246348/2463489x1.webp)
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own Phillips screwdriver ,
adjustable wrench , and rubber mallet
.
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M8 Split |
| M8 Washer | M8 Large | M10 Split |
| Wave Washer | Large Wave | ||
Washer | Washer | Washer |
| Washer | |||||
Star Washer |
| M4 x 12mm Flat | M4 x 16mm | M4 x 19mm | M4 x 22mm |
| M4 x 32mm | ||
Head Screw | Screw | Screw | Screw |
| Screw | ||||
M8 Nylon |
| M10 Nylon | M8 x 19mm Patch | M8 x 23mm Button | M8 x 25mm Patch | ||||
Locknut | Locknut | Screw | Screw |
| Screw | ||||
M10 x 60mm Button Screw |
| M10 x 76mm Button Bolt | |||||||
M10 x 50mm Carriage Bolt | M10 x 75mm Carriage Bolt | ||||||||
|
|
|
| 5 |
|
|
|
|
|