8Loosen 2 shoulder bolts about 2-3 turns. Do not remove them.
Compressor and Motor Repair
Reassembly
1Using two new shoulder bolts and rubber mounts included in your kit, insert bolts into openings until they start to snug up on rubber mounts.
ti4463a
ti4465a
9Remove single shoulder bolt on other side of motor com- pletely.
2Slide new motor into sprayer frame, aligning motor frame opening under bolts. Tighten bolts.
ti4425a
ti4468a
10 Slide out motor assembly.
ti4462a
11Completely remove old shoulder bolts and rub- ber mounts.
ti4464a
12 Thoroughly clean inside housing to remove dust and debris.
3Replace shoulder bolt on left side with new bolt from your kit.
Tighten bolt.
ti4424a
4Replace end cover. Replace and tighten 3 screws.
ti4484a
ti4485a
5Reattach air line to cooler and compressor. Tighten fitting.
ti4516a
310645H | 15 |
