Compressor Rebuild Kit
Compressor Rebuild Kit
To replace piston, seals and sleeve.
For 120 V sprayer use Compressor Rebuild Kit 287330. For 230 V sprayer use Compressor Rebuild Kit 287331.
Disassembly
First read and follow instructions in the Before performing any service on sprayer section, page 9.
Then remove back cover, page 9.
1Disconnect air line to motor.
ti4460a
2Remove 3 screws in side of motor cover. Remove cover.
4Remove 3/8 in. bolt holding piston to motor shaft.
ti4707a
5Loosen 4 bolts on top of motor housing.
ti4708a
6Remove bolts and housing from motor.
ti4479a
ti4478a
ti4709a
3Remove fan bolt from center of fan and remove fan from housing.
ti4706a
7Remove piston rod from motor.
8Using parts in kit replace piston, seals and sleeve.
ti4710a
310645H | 17 |
