Valve Access, Lift Out Doors | Hearth and Home Technologies 42-B

E. Valve Access

•The gas valve can be accessed behind the cement refractory panel on the right side of the ﬁreplace.

•Lift doors out and set aside. There is a washer under each door. Be careful not to loose those washers.

Washer

Figure 6.1 Lift Out Doors

•Remove logs if access is necessary after installation is complete. See Section 9.C. Remove logs in reverse order of set up.

•Remove grate if access is necessary after installation is complete. (Refer to Section 9.B.)

•Remove two screws on side of pilot shield and remove shield.

Figure 6.2 Remove Pilot Shield

•Use a phillips screwdriver to remove the two screws securing the refractory retaining strip. Remove the refractory side panel and set aside.

•Remove the inside valve access panel by lifting it up and out.

Figure 6.4 Remove Valve Access Panel

•Use a phillips screwdriver to remove the exterior valve access panel (remove four screws).

Figure 6.5 Remove Exterior Valve Access Panel

•Use a manometer on the lower out pressure tap. Start up the ﬁreplace to verify the pressure and adjust as necessary. Reverse these steps to reassemble before log positioning.

Figure 6.3 Loosen Refractory Retaining Strip

Figure 6.6 Connect Manometer

Heat & Glo LifeStyle Collection • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev J 11/08 13

42H-B, 42-B specifications

Hearth and Home Technologies has long been a leader in the realm of home heating and comfort solutions, and their 42-B and 42H-B models exemplify this commitment to quality and innovation. These models are designed to meet modern heating needs while providing an aesthetic appeal that enhances any living space.

One of the standout features of the 42-B and 42H-B is their impressive heating capabilities. With a BTU output that can efficiently heat large areas, these units are perfect for homeowners looking to maintain a comfortable environment during the colder months. The ability to generate substantial heat without consuming excessive fuel has made these models a preferred choice among energy-conscious consumers.

In addition to their efficient heating, the 42-B and 42H-B also incorporate advanced venting technologies. These models are designed with flexible venting options, allowing for both direct vent and B-vent installation. This versatility not only simplifies the installation process but also provides homeowners with more options in terms of their heating setup. Whether looking to install in a new build or retrofit an existing space, the 42-B and 42H-B fit seamlessly into various configurations.

Another notable feature of these models is their aesthetic design. Hearth and Home Technologies understands the importance of appearance in maintaining the overall decor of a home. The 42-B and 42H-B come with customizable front options, ensuring that each unit can match the individual style of a home. From traditional to contemporary looks, these models can complement any interior with elegance and charm.

Safety is a top priority for Hearth and Home Technologies, and the 42-B and 42H-B have been designed with several safety features to ensure peace of mind. The units come equipped with a glass front that remains cool to the touch, preventing accidental burns, and advanced safety shutoff mechanisms that activate in the event of a malfunction, ensuring that homeowners can enjoy their heating solutions without worry.

In conclusion, the Hearth and Home Technologies 42-B and 42H-B models combine efficiency, safety, versatility, and style. They offer an exceptional heating experience, making them an attractive option for anyone looking to enhance their home comfort. With their reliable performance and elegant appearance, these units stand as a testament to Hearth and Home Technologies' dedication to quality in the home heating market.

Hearth and Home Technologies 42-B, 42H-B owner manual Valve Access, Lift Out Doors

Models: 42H-B 42-B