![](/images/new-backgrounds/1027718/2771819x1.webp)
5
B. Securing and Leveling Appliance
|
| WARNING | |
Sharp Edges | |||
|
| ||
• Wear protective gloves |
| Fire Risk | |
and safety glasses during |
| • Prevent contact with sagging, loose | |
installation. |
| insulation. | |
|
| • Do NOT install against vapor barriers or | |
| |||
A. Remove Logs and Shipping Cover |
| exposed insulation. | |
|
| ||
| The diagram shows how to properly position, level, and se- | ||
Remove locking screw at the top of the doors (shown in Fig- |
| ||
| cure the appliance (see Figure 5.2). Nailing tabs are pro- | ||
ure 5.1). |
| ||
| vided to secure the appliance to the framing members. | ||
|
|
Open the doors by sliding the handles toward the outside edges of the doors. Remove the cartons of logs from their shipping location in the appliance.
Set the logs and door lock bracket screw aside for later re- installation.
Locking Screw
Open Open
Figure 5.1 Door Operation
•Place the appliance into position on either a combustible or
Note: Remove the top standoffs before sliding appliance into position if using an FPS prefab enclosure.
•Level the appliance from side to side and front to back.
•Shim the appliance with
•Bend out nailing tabs on each side.
•Keep nailing tabs flush with the framing.
•Secure the appliance to the framing by using nails or screws through the nailing tabs.
Upper front can be covered with emoved and replaced with
NAILING TABS
Figure 5.2 Proper Positioning, Leveling and Securing of an
Appliance
CAUTION
Do NOT notch into the framing around the appliance spacers.
10 | Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota |