Hearth and Home Technologies 42H-B, 42-B owner manual Clearances, Mantel Projections

B. Clearances

	B
	A
Upper front can be
covered with	0 in. to level
non-combustible
material or removed	of standoffs
and replaced with
non-combustible
material.

Object	36 in.
Combustible	(914 mm)

		Framing Dimensions
		A	B	C	D
	in.	24-1/8	43-7/8	49	43-7/8
	mm	613	1114	1245	1114
	D
	Header height.
C	Use only noncombustible
	material below the top of
	the top standoffs.
	1-1/2 in. (38 mm)
84 in.		1-1/2 in.
(2134 mm)
		(38 mm)
to ceiling
			1/2 in. (13 mm)
			Drywall
0 in.			0 in.
	Combustible flooring may be installed next
	to the front of the appliance.

Figure 3.2 Framing Dimensions

C. Mantel Projections

WARNING

Fire Risk

• Comply with all minimum
clearances to combustibles
as specified.
• Framing	or finishing
material	used on the
front of, or in front of, the
appliance closer than the

Roof or

Overhang

minimums listed, must

be constructed entirely of

noncombustible materials

(i.e., steel studs, concrete

board, etc.).

Failure to comply may cause

12 in. (305 mm) max. combustible mantel depth

Structure Additionalor Sidewall

Fireplace	Structure
Mantel

84 in. (2134 mm) minimum

height

fire.

		Then B
	If A is:	must be at
		least:
in.	6 - 36	26
mm	152 - 914	660
in.	36 or more	18
mm	914 or more	457

B

A

Figure 3.3 Clearances to Mantels or Other Combustibles Above Appliance

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev L 10/09