Heatilator • GDST4336I, GDFL4136I, GDCR4136I, GDCL4136I • 2129-900 Rev. F • 11/0862
Figure 11. Placement of Log #2 Figure 12. Placement of Log #2
Figure 13. Placement of Log #3 Figure 14. Placement of Log #3
STEP 2. Log #2 (SRV2129-705): Locate portion of Log #2 that is highlighted in Figure 11. Place that portion of
Log #2 on the indentation on Log C. Log #2 will rest on the tip of Log B. Slide the bottom of Log #2 up to the edge of the
burner as shown in Figure 12.
C
C
2
2
B
B
BURNER
BURNER
EDGE
EDGE
C
C
2
2
B
B
1 in.
1 in.
2
2
D
D
3
3
3
3
STEP 3. Log #3 (SRV2129-707): Place Log #3 so that it rests on the indentations located on Log #2 and Log D.
Log 3 should extend beyond Log #2 by one inch.